User's Manual

| 10U
30
13 CONFIGURATION SETTING
You can set the configuration of the 10U by the voice menu instruction described below.
1. To enter into voice configuration menu, press and hold the Joystick for 12 seconds until the LED shows solid blue and
Configuration menu
2. Move the Joystick up or down to navigate between the menus. You will hear voice prompts for each menu item as
below.
3. You can enable the feature or execute the command by tapping the Front Button, or disable the feature by tapping the
Joystick.
4. If any button is not pressed within 10 seconds, the 10U will exit the configuration and go back to stand-by mode.
5. Exit
configuration
The voice prompt for each menu item is as below:
(1) Speed dial
(2) VOX phone
(3) VOX intercom
(4) Voice prompt
(5) RDS AF setting
(6) Sidetone
(7) Noise control
(8) Delete all pairings
(9) Factory reset
(10) Remote Control Pairing
(11) Exit configuration