User's Manual

| 10U
15
5.4 Intercom Pairing
5.4.1 Pairing with Other 10U Headsets for Intercom Conversation
The 10U can be paired with up to three other headsets for Bluetooth intercom conversation.
1. Turn on the two 10U headsets (A and B) that you would like to pair with each other.
2. Press and hold the Joystick of the headset A and B for 5 seconds until red LEDs of the both units start to flash rapidly.
Intercom pairing
3. Press the Joystick for 1 second of any one of the two headsets A and B, and wait unit the LEDs of both headsets turn
to blue and intercom connection is automatically established. The two 10U headsets A and B are paired with each other
for intercom conversation. If the pairing process is not completed within one minute, the 10U will return to stand-by mode.
Pairing A & B
4. You can make other pairing between headsets A and C, and between headsets A and D by following the same
procedure as above.
      Last-Come, First-Served         
conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second
intercom friend, and third intercom friend.
Note:
For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is
the second intercom friend of headset A, and headset B is the third intercom friend of headset A.
5.4.2 Pairing with Other Sena Headset Models for Intercom Conversation
The 10U can be paired with all other Sena headset models such as the 20S, SMH10 and the SMH5 for intercom
conversation. Please follow the same procedure as above to pair with these headset models.
Note:
The SMH5 cannot participate in three-way or four-way conference intercom with the 10U. The SMH5 has a limited
capability of having two-way intercom with other Sena headsets.