User's Manual
| 10U
14
Your headset is paired
Note:
- If the GPS is also your preferred Bluetooth stereo music source, you can pair the GPS to the 10U by following the
-
- You have to use a motorcycle specific GPS, which transmits turn-by-turn voice instructions to the headset by Bluetooth.
Most automotive GPS systems do not have this feature.
- The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses Hands-Free Profile. The
incoming audio from the two-way radio via SR10 is heard in the background while having an intercom conversation or a
mobile phone call.
- The GPS navigation or a radar detector could be connected to the SR10 by wire. The GPS voice instruction or the radar
detector alarm is also heard in the background via SR10 while having an intercom conversation or a phone call. Please
5.3 Advanced Selective Pairing: A2DP Stereo or Handsfree
When you are using a smartphone, sometimes you may need to selectively use the 10U for A2DP stereo music only or
for mobile phone handsfree only. These instructions are for advanced users who want to pair the 10U to their
smartphones with only one selective profile: A2DP for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the 10U, you must clear the previous pairing list on both devices: the
mobile phone and the 10U. To clear the pairing list on the 10U, please do a factory reset or following the pairing list
the pairing list on the mobile phone, please refer to the mobile phone manual. For most smartphones, delete the Sena
10U from the list of Bluetooth devices in the settings menu.
5.3.1 A2DP Stereo Music Only
1. Turn on the headset and press the Front Button for 5 seconds until the LED flashes red and blue alternately and you
hear multiple beeps.
Media selective
pairing
3. Search for Bluetooth devices on your smartphone. Select the Sena 10U in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for PIN.
5.3.2 HFP for Phone Call Only
1. Turn on the headset and press the Front Button for 5 seconds until the LED flashes red and blue alternately and you
hear multiple beeps.
Phone selective pairing
3. Search for Bluetooth devices on your smartphone. Select the Sena 10U in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for PIN.