User's Manual
| 10U
13
5 PAIRING THE 10U WITH BLUETOOTH DEVICES
Before using the 10U Bluetooth headset with any other Bluetooth devices for the first time, you will need to pair them
together. You can pair the 10U with Bluetooth mobile phones, Bluetooth stereo devices such as MP3 players, or
motorcycle specific Bluetooth GPS navigation, and with other Sena Bluetooth headsets. The pairing operation is required
only once for each Bluetooth device. The headset remains paired with the devices and automatically reconnects to them
when they are within range. You will hear a high toned single beep and a voice prompt whenever the headset reconnects
Phone connectedMedia connected
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device
Follow the procedure below to pair a mobile phone or a Bluetooth stereo device such as an MP3 player with your 10U.
1. Press and hold Phone pairing
2. Search for Bluetooth devices on your mobile phone. Select the Sena 10U in the list of the devices detected on the
mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
4. The mobile phone confirms that pairing has been completed and the 10U is ready to use. You will hear a voice prompt,
Your headset is paired
5. If the pairing process is not completed within three minutes, the 10U will return to stand-by mode.
Note:
1. If the Bluetooth connection between the headset and a mobile phone is disconnected, tap the Front Button to recover
the Bluetooth connection immediately.
2. If the Bluetooth connection between the headset and a media player is disconnected, press the Joystick for 2 seconds
to recover the Bluetooth connection and play.
5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10
Typical Bluetooth headsets can connect with only one HFP (Hands-Free-Profile) Bluetooth device such as mobile phone,
GPS, and Sena SR10, but second mobile phone pairing allows the headset to connect with two HFP devices
simultaneously. So, when you already have a mobile phone connected with the 10U, you can also pair and connect a
second mobile phone or other HFP devices.
1. To pair the HFP device, press and hold the Joystick for 5 seconds until the red LED flashes red rapidly and you hear
Intercom pairing
2. Within 2 seconds, tap the Front Button again, then the LED flashes blue rapidly and you will hear a voice prompt,
Second mobile phone pairing
3. Search for Bluetooth devices on the HFP device. Select the Sena 10U in the list of the devices detected on the HFP
device.
4. Enter 0000 for the PIN. Some HFP devices may not ask for the PIN.
5. The HFP device confirms that the pairing is completed and the 10U is ready to use. You will hear a voice prompt,