User's Manual

Rotate Jog Dial
Tap Phone Button
Tap Jog Dial
Speed Dial
Execute
N/A
VOX Phone
Enable
Disable
VOX Intercom
Enable
Disable
Voice Prompt
Enable
Disable
Delete All Pairings
Execute
N/A
Exit Configuration
Execute
N/A
Voice Configuration Menu & Button Operations
14.2 Camera Configuration Setting
You can enter into camera configuration of the 10C by following the steps below:
1. To enter into camera configuration menu, press and hold the Camera Button for 3 seconds until you hear a voice
prompt, “Camera setup”.
2. Rotate the Jog Dial clockwise or counter clockwise to navigate between the menus. You will hear voice prompts
for each menu item as below.
3. You can enable or disable a feature, or execute a command by tapping the Phone Button.
4. If you do not press any buttons for 10 seconds, the 10C will exit the configuration and go back to stand-by mode.
5. If you want to exit the camera configuration, tap the Jog Dial once and you will hear a voice prompt, “Exit
Configuration”.
The voice prompt for each menu item is as below:
(1) Photo mode setting
(2) Video mode setting
(3) Video resolution setting
(4) Timelapse interval setting
(5) Date caption
(6) Microphone
(7) Auto camera sleep
(8) Format SD card
(9) Exit configuration