User's Manual

14 CONFIGURATION SETTING
14.1 Headset Configuration Setting
You can set the configuration of the 10C by the voice menu instruction as below.
1. To enter into voice configuration menu, press and hold the Jog Dial for 12 seconds until the LED shows solid blue and
you hear high toned double beeps. You will also hear a voice prompt “Configuration menu”.
2. Rotate the Jog Dial clockwise or counter clockwise to navigate between the menus. You will hear voice prompts for
each menu item as below.
3. You can enable the feature or execute the command by tapping the Phone Button, or disable the feature by tapping the
Jog Dial.
4. If any button is not pressed within 10 seconds, the 10C will exit the configuration and go back to stand-by mode.
5. If you want to exit the configuration immediately, rotate the Jog Dial until you hear a voice prompt, “Exit configuration”,
and tap the Phone Button.
The voice prompt for each menu item is as below:
(1) Speed dial
(2) VOX phone
(3) VOX intercom
(4) Voice prompt
(5) Delete all pairings
(6) Exit configuration
14.1.1 Assigning Speed Dial
Voice Prompt
"Speed dial"
Factory Default
N/A
Execute
Tap the Phone Button
1. To assign a phone number as a speed dial, rotate the Jog Dial until you hear a voice prompt, “Speed dial”.
2. Tap the Phone Button, and you will hear a voice prompt, “Speed dial one” and “Phone connected”.