User's Manual

3. Scan function stops when you double tap the Phone Button again.
4. To save a station while scanning frequencies, tap the Phone Button when at that station. You will hear a voice prompt
from the 10C, “Save preset (#)”. The station will be saved as the next preset number.
5. All stations preset during “Scan”, will overwrite previously set stations.
12.5 Temporary Preset
With the temporary preset function, you may temporarily preset stations automatically without changing the existing preset
stations. Tap the Phone Button three times to automatically scan for 10 temporary preset stations. The temporary preset
stations will be cleared when the system is powered off.
12.6 Region Selection
You can select the proper FM frequency region from the Sena Device Manager. With the region setting, you may optimize
the seek function to avoid unnecessary frequency ranges (Factory default: worldwide).
Region
Frequency range
Step
Worldwide
76.0 ~ 108.0 MHz
± 100 kHz
Americas
87.5 ~ 107.9 MHz
± 200 kHz
Asia
87.5 ~ 108.0 MHz
± 100 kHz
Australia
87.5 ~ 107.9 MHz
± 200 kHz
Europe
87.5 ~ 108.0 MHz
± 100 kHz
Japan
76.0 ~ 90.0 MHz
± 100 kHz