User's Manual

12 FM RADIO
12.1 FM Radio On/Off
To turn on the FM radio, press and hold the Phone Button for 2 seconds until you hear a mid-toned double beep sound.
You will then hear a voice prompt, “FM on”.To turn off the FM radio, press and hold the Phone Button for 2 seconds until
you hear a voice prompt, “FM off”. When you power it off, the 10C will remember the last station frequency. When you
power it on, the last station frequency will be playing.
12.2 Preset Stations
You can listen to preset stations while listening to the FM radio. Tap the Phone Button once to go upward to your next
saved preset station.
12.3 Seek and Save
“Seek” is the function that searches for station to station frequencies. To use the “Seek” function, please follow the
procedure below:
1. Rotate while pressing the Jog Dial clockwise to search up the station dial or counter clockwise to search down the
station dial.
2. If the tuner finds a station while searching frequencies, it stops the seek function.
3. To save the current station, press and hold the Jog Dial for 2 seconds until you hear a voice prompt “Preset (#)”.
4. Rotate the Jog Dial clockwise or counter clockwise, in order to select which preset number you want for that specific
station. You can save up to 10 preset stations. (You may cancel the preset operation by waiting approximately 10
seconds. You will then hear “Save preset cancelled”. You can also rotate the Jog Dial clockwise or counter clockwise
until you hear “Cancel”. Tap the Jog Dial to confirm cancellation. You will then hear “Save preset cancelled”).
5. To save the current station, tap the Jog Dial again. You will then hear a voice prompt, “Save preset (#)”.
6. To delete the saved station in the preset number, tap the Phone Button. You will then hear a voice prompt “Delete
preset (#)”.
Note:
1. You can save FM stations to presets before using FM radio. Connect the 10C to your PC and open the Sena Device
Manager. It allows you to save up to 10 FM station frequency presets on the 10C settings menu. You may do the same
operation by using the Sena Smartphone App.
2. You can still answer an incoming phone call and intercom while listening to the FM radio.
12.4 Scan and Save
“Scan” is the function that automatically searches station frequencies, starting from the current frequency and up. To use
the scan function, please follow the procedures below:
1. Double tap the Phone Button. Then the current station frequency moves upward to find other station frequencies.
2. If the tuner finds a station, it stays at the station frequency for 8 seconds, then scanning to the next station frequency.