User's Manual

Single tap
Disconnect (B)
Double tap
Disconnect (C)
End Three-way Intercom
9.3 Four-way Intercom
9.3.1 Starting Four-way Intercom
You can have four-way conference intercom with three other 10C users by adding one more intercom participant to the
three-way intercom. While you are having a three-way intercom as above in section 9.2, a new participant (D), who is an
intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom
friend (C). Please note that in this case, the new participant (D) is an intercom friend of (C), not of you (A).
9.3.2 Ending Four-way Intercom
As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just
disconnect a single intercom connection.
1. Press the Jog Dial for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the
intercom connections between you (A), and your intercom friends (B) and (C).
2. Tap or double tap the Jog Dial to disconnect the intercom connection with one of the two intercom friends accordingly.
However, when you disconnect the second friend (C) by double tapping the Jog Dial, you will be disconnected with the
third participant (D) as well. This is because the third participant (D) is connected with you via the second friend (C).
Jog Dial Operation
Result
Press for 1”
Disconnect (B), (C) & (D)
Single tap
Disconnect (B)
Double tap
Disconnect (C) & (D)
End Four-way Intercom