User's Manual

4. After selecting the last number redial menu, you will hear a voice prompt, “Last number redial”. Then, to redial the last
phone call number, tap the Phone Button.
5. To call one of the speed dials, rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus until
you hear a voice prompt, “Speed dial (#)”. Then, tap the Phone Button.
6. If you want to exit the speed dial immediately, rotate the Jog Dial until you hear a voice prompt, “Cancel”, and tap the
Phone Button or the Jog Dial. If you do not press any button within 15 seconds, the 10C will exit the voice speed dial
menu and go back to stand-by mode.
Note:
1. Make sure that you connect the mobile phone and the headset to use the speed dial function.
2. You need to assign speed dial numbers before using the speed dial (please refer to section 14.1.1, “Assigning Speed
Dial”).
Answer
Tap Phone Button or Tap Jog Dial or Say “Hello”
End
Tap Phone Button or Press Jog Dial for 2”
Reject
Press Jog Dial for 2”
Transfer
Press Phone Button for 2”
Call
Use phone keypad
Speed Dial
Double tap Phone Button
Voice Dial
Tap Phone Button
Mobile Phone Call Button Operations
7.3 GPS Navigation
If you pair a Bluetooth GPS to the 10C as described in section 7.2, “Second Mobile Phone Pairing”, you can listen to GPS
instructions wirelessly. Rotate the Jog Dial to adjust volume. The GPS voice instruction interrupts intercom conversation
but it is automatically reestablished after the GPS voice instruction ends.
7.4 Sena SR10, Two-Way Radio Adapter
You can use a two-way radio and the 10C Bluetooth intercom simultaneously by using the Sena SR10, a Bluetooth Two-
way Radio Adapter (please refer to section 6.2, “Second Mobile Phone Pairing”). Incoming audio from the two-way radio
will not interrupt an intercom conversation but is heard in the background. This is useful when you have an intercom
conversation with a passenger on the back seat and use a two-way radio for group communication with other motorcycle
riders.