User's Manual

4 GETTING STARTED
4.1 Button Operation
Phone Button
● Enter into mobile phone pairing mode
● Answer and end a mobile phone call
● Speed Dial
● Call transfer between mobile phone and headset
● Enter into factory reset mode
● Turn on/off FM tuner
Jog Dial
● Volume adjustment by rotating
● Enter into intercom pairing mode
● Start and end intercom conversation
● Answer and end a mobile phone call
● Reject an incoming mobile phone call
● Play and pause Bluetooth stereo device
● Track forward and track back by pressing down and rotating
● Enter into voice configuration setting
● Navigate through configuration menu
● Seek FM radio station
Camera Button
● Take photo shots
● Record videos
● Turn on/off camera
● Enter into camera configuration
4.2 Powering On and Off
Press the Jog Dial and the Phone Button at the same time to power the headset either on or off. To power on the headset,
press the Jog Dial and the Phone Button at the same time until the blue LED appears while hearing the ascending beeps.
To power off the headset, press the Jog Dial and the Phone Button at the same time until the red LED appears briefly
while hearing descending beeps.
4.3 Charging
You can charge the headset by connecting the supplied USB power & data cable into a computer’s USB port or USB wall
charger. You can use any standard micro-USB cable to charge the headset. The LED turns red while the headset is
charging and turns blue when it is fully charged. It takes about 2.5 hours to be completely charged. You can use all the
functions of the headset while charging.
4.4 Checking the Battery Level
You can check the battery level in two different ways when the headset is powering on.