| Bluetooth Mic & Intercom Bluetooth® Mic & Intercom SENA www.sena.
| Bluetooth Mic & Intercom © 1998-2014 Sena Technologies Inc. All rights reserved. Sena Technologies Inc. reserves the right to make any changes and improvements to its product without prior notice. Sena™ is a trademark of Sena Technologies Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, EXPAND™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SR10i™, SM10™, GoPro® Pack™, Bluetooth Mic & Intercom™ are trademarks of Sena Technologies, Inc. or its subsidiaries.
| Bluetooth Mic & Intercom CONTENTS 1. INTRODUCTION 2. PACKAGE CONTENTS 3. GETTING STARTED 3.1 Installing the Bluetooth Mic & Intercom 3.1.1 Installing on the Armband 3.1.2 Installing on the Collar Clip 3.2 Connecting Your Headphones 3.3 Powering On/Off 3.4 Voice Prompt 3.5 Volume Adjustment 3.6 Using Internal/External Microphone 3.7 Function Priority 3.8 Charging 3.9 Low Battery Warning 3.10 Checking the Battery Level 3.10.1 LED Indicator 3.10.2 Voice Prompt Indicator 3.11 Fault Reset 4.
| Bluetooth Mic & Intercom 5.3 Bluetooth Stereo Device Pairing 5.4 Pairing with the Bluetooth Pack for GoPro® or PRISM 6. PAIRING WITH SELECTIVE PROFILE: HFP OR A2DP STEREO 6.1 Phone Selective Pairing: HFP for Phone Call Only 6.2 Media Selective Pairing: A2DP Stereo Music Only 7. STEREO MUSIC 8. MOBILE PHONE CALL MAKING AND ANSWERING 8.1 Mobile Phone Call Making and Answering 8.2 Speed Dialing 9. INTERCOM 9.1 Pairing with Other Bluetooth Mic & Intercom for Intercom Conversation 9.
| Bluetooth Mic & Intercom FCC RF Exposure Statement FCC Caution CE Declaration of Conformity Industry Canada Statement Bluetooth License WEEE (Waste Electrical and Electronic Equipment ) SAFETY INFORMATION Product Storage and Management Product Use Battery PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Warranty Exclusions Reasons for Limited Liabilities Limitation of Liability Liabilities Disclaimer Warranty Service Free-of-charge Service Charged Service Return for Full Refund
| Bluetooth Mic & Intercom 1. INTRODUCTION Thank you for choosing the Sena Bluetooth Mic & Intercom. The Sena Bluetooth Mic & Intercom is an ultra-slim, light weight microphone that allows users to make an intercom call. It may function as a microphone when paired with the Sena Bluetooth Action Camera or Sena Bluetooth Audio Pack for GoPro®. It also works as a headset and intercom through the use of a pair of stetero headphones with a built-in microphone that users may have.
| Bluetooth Mic & Intercom * in open terrain Key Specifications: ● Bluetooth 3.
| Bluetooth Mic & Intercom 2.
| Bluetooth Mic & Intercom Micro ophone Windscreens USB Po ower & Data Cable Note: The pacckage does not n include sttereo headph hones. Howe ever, it is opttional to use stereo head dphones with h a built-in n microphone e for the intercom functio on. 3. GE ETTING G START TED 3.1 Ins stalling th he Bluetoo oth Mic & Intercom I 3.1.1 Ins stalling on tthe Armband d 1. Attach h the armban nd on the back of the Blu uetooth Mic along a the guide rail. d on your arm m. 2. Wear the armband 3.
| Bluetooth Mic & Intercom 3.1.2 Installing on the Collar Clip 1. Attach the collar clip on the back of the Bluetooth Mic along the guide rail. 2. Attach the Bluetooth Mic on your collar by the clip. 3. Adjust the direction of the microphone to your mouth by rotating the Bluetooth Microphone. 3.2 Connecting Your Headphones The Bluetooth Mic does not have internal speakers.
| Bluetooth Mic & Intercom Note: ● You can control all the functions of the Bluetooth Mic by your headphones if it has the controller for an Android phone. ● You can play/pause the music, or start/end the intercom by your headphones if it has the controller for an iPhone. 3.3 Powering On/Off To power on the Bluetooth Mic, slide the Power Switch to on. The Blue and Red LEDs will turn on. To power off, slide the Power Switch to off. 3.
| Bluetooth Mic & Intercom you hear Bluetooth MP3 music. So you can always maintain the preferred optimum volume level for each audio source. 3.6 Using Internal/External Microphone (factory default: internal microphone) Users may use either the built-in microphone of the Bluetooth Mic (internal microphone) or the microphone of a connected pair of headphones (external microphone). According to the application, you may use either ones by using the switching operation.
| Bluetooth Mic & Intercom 3.9 Low Battery Warning When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear mid-toned triple beeps and a voice prompt, “Low battery”. 3.10 Checking the Battery Level You can check the battery level in two different ways when the Bluetooth Mic is powering on. 3.10.1 LED Indicator When the Bluetooth Mic is powering on, the red LED flashes rapidly indicating the battery level.
| Bluetooth Mic & Intercom
| Bluetooth Mic & Intercom 4. BLUETOOTH MIC & INTERCOM CONFIGURATION SETTING You can set the configuration of the Bluetooth Mic by the voice menu instruction as below. 1. To enter into voice configuration menu, press and hold the Center Button for 12 seconds until the LED turns solid blue and you hear high toned double beeps. You will also hear a voice prompt saying “Configuration menu”. 2. Tap the (+) Button or (-) Button to navigate between the menus.
| Bluetooth Mic & Intercom 4.1 Mo obile Phone Pairing “Phone pairing” Voice P Prompt N/A A Factory y Default nto mobile ph hone pairing mode, tap the t (+) Button or the (-) Button B until yyou hear a voice v prompt, To go in “Phone pairing”. Please refer to o section 5.1 1 for details on mobile phone pairing g. If you tap the (+) or (-)) Button, you y can exit from the pho one pairing mode. m 4.
| Bluetooth Mic & Intercom N/A Factory Default To go into multipoint pairing mode, tap the (+) Button or the (-) Button until you hear a voice prompt, “Multipoint pairing”. Please refer to section 5.2 for details on multipoint pairing. If you tap the (+) or (-) Button, you can exit from the multipoint pairing mode. 4.
| Bluetooth Mic & Intercom 2. Tap the Center Button, and you will hear a voice prompt saying “Speed dial one” and “Phone connected”. 3. Tap the (+) Button or the (-) Button to select one of three speed dial numbers and you hear a voice prompt saying “Speed dial (#)”. 4. Call a phone number you want to assign and you will hear a voice prompt saying “Save speed dial (#)”. The phone number is automatically assigned to the selected speed dial number.
| Bluetooth Mic & Intercom Tap the Center Button Enable / Disable Sidetone is the sound of your own voice as picked up by your microphone and reproduced in your own ear. It helps you to naturally speak at the correct level according to varying noise conditions. If this feature is enabled, you can hear what you are speaking during a recording or intercom conversation or a phone call. 4.
| Bluetooth Mic & Intercom N/A Factory Default Tap the Center Button Execute To restore factory default settings on the Bluetooth Mic, tap the (+) Button or the (-) Button until you hear a voice prompt, “Factory reset”. Tap the Center Button to confirm. The Bluetooth Mic powers off with a voice prompt, “Headset reset, goodbye” and powers on again. 4.
| Bluetooth Mic & Intercom Execute Exit Configuration Voice Configuration Menu & Button Operations 5. PAIRING THE BLUETOOTH MIC & INTERCOM WITH BLUETOOTH DEVICES Before using the Bluetooth Mic, you need to do the pairing operation. It can be paired with Bluetooth mobile phones or Bluetooth stereo devices such as MP3. This pairing operation is only required once for each Bluetooth device.
| Bluetooth Mic & Intercom 2. Double tap the (+) Button then the blue LED flashes rapidly and you will hear voice prompt, “Multipoint pairing”. 3. If you want to pair a second mobile phone, search for the Bluetooth device on your mobile phone, and select the Sena Bluetooth Mic in the list of the devices detected on the mobile phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 5. The mobile phone confirms that pairing has completed and the Bluetooth Mic is ready to use.
| Bluetooth Mic & Intercom STEREO If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the Bluetooth Mic for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the Bluetooth Mic to their smartphones only with one selective profile: A2DP stereo for music or HFP for phone call.
| Bluetooth Mic & Intercom 7. STEREO MUSIC You can listen to stereo music from your Bluetooth wireless audio device. The Bluetooth audio device must be paired with the Bluetooth Mic by following the “Bluetooth Stereo Device Pairing” procedures described in the 5.3 chapter. The Bluetooth Mic supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the Bluetooth Mic to remotely control music playback.
| Bluetooth Mic & Intercom Note: If you are using a multipoint mobile phone connection and you have an incoming call from the second phone during the call of the first phone, then you may still receive the call from second phone. In this case, the call from the first phone is in waiting mode. If you end a call, then it will automatically guide you to the first phone call. 8.2 Speed Dialing You can quickly make a phone call by using the voice speed dial menu. 1.
| Bluetooth Mic & Intercom Press the Center Button for 2 seconds End Press the Center Button for 2 seconds Reject Use phone keypad Press the (+) Button for 3 seconds Press the Center Button for 3 seconds Call Speed Dial Voice Command Mobile Phone Call Button Operations If you have a second mobile phone connected with the Bluetooth Mic by multipoint connection, you can answer the incoming call to the second mobile phone by tapping the Center Button while you are on the line of the first mobile phone.
| Bluetooth Mic & Intercom Pairing A & B 4. You can make other pairings between the Bluetooth Mic A and C, and between the Bluetooth Mic A and D by following the same procedure as above. Pairing A & C Pairing A & D 5. The intercom pairing queue is ‘Last-Come, First-Served’. If a Bluetooth Mic has multiple paired Bluetooth Mics for intercom conversations, the last paired Bluetooth Mic is set as first intercom friend. The previous intercom friend becomes second intercom friend, and third intercom friend.
| Bluetooth Mic & Intercom 9.3.1 Start and End Two-way Intercom 1. You can start a one-on-one intercom conversation with any intercom friend by tapping the Center Button: Single tapping to intercom with the first intercom friend, double tapping with the second intercom friend, or triple tapping with the third intercom friend. 2. To terminate a one-on-one intercom conversation, single tap the Center Button. This will end the intercom conversation.
| Bluetooth Mic & Intercom 9.4 Three-way Conference Intercom 9.4.1 Start Three-way Intercom You (A) can have a three-way conference intercom with two other Bluetooth Mic friends (B & C) by establishing two intercom connections at the same time.
| Bluetooth Mic & Intercom 9.4.2 End Three-way Intercom When you are a member of an active three-way conference intercom, you can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1. Press the Center Button for 1 second until you hear a beep to terminate three-way conference intercom completely. It terminates both intercom connections with (B) and (C). 2.
| Bluetooth Mic & Intercom phone call Tap the Center Button End intercom first Press the Center Button for 2“ or Wait for the called person to end the call End phone call first Start & End Three-way Conference Phone Call 9.5 Four-way Conference Intercom 9.5.1 Start Four-way Intercom You can have four-way conference intercom with three other Bluetooth Mic users by adding one more intercom participant to the three-way intercom. While you are having three-way intercom as above in section 9.4.
| Bluetooth Mic & Intercom Result Center Button Disconnect (B), (C) & (D) Press for 1” Disconnect (B) Single tap Disconnect (C) & (D) Double tap End Four-way Intercom 9.6 Intercom Failure When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low toned double beep signifying an intercom busy signal. In this case, you have to try again later. 9.
| Bluetooth Mic & Intercom 3. Perrform the ope eration requiired for hand dsfree pairing g on the non--Sena Blueto ooth headsett (refer to the e use ers’ manual of o the headsets you want to use). The Bluetooth Mic will auto omatically perform pairing g with h non-Sena Bluetooth he eadsets in pa airing mode. 10.
| Bluetooth Mic & Intercom 2. Start an intercom m conversation with non n-Sena Blue etooth heads set (B) in yo our intercom m group. Forr example e, you (A) m may start an intercom co onversation with w non-Sena Bluetooth h headset (B B). The non-Sena Bluetooth head dset (B) may y also start an intercom ccall with you (A). ( O Bluetoo oth Mic (C) may m join the intercom i by making an in ntercom call tto you (A). 3. The Other 4.
| Bluetooth Mic & Intercom You ma ay make a fo our-way Univ versal Interc com connecttion with a couple c of diffferent config gurations, 1)) three Bluetooth Mic and one no on-Sena Blu uetooth head dset or 2) tw wo Bluetooth h Mic and tw wo non-Sena a Bluetootth headsets.
| Bluetooth Mic & Intercom 4. Now two t Bluetootth Mic (A & C) C and two non-Sena n Blu uetooth head dsets (B & D D) are connec cted with the e four-way y Universal In ntercom. You may y disconnectt a four-way Universal In ntercom usin ng the same way as you do in a norm mal four-way y intercom m. Please refe fer to section, 15.2 “End Four-way F Inttercom”. 10.4.2 Four-way F Un niversal Intercom Case 2 Three Bluetooth B Mic c (A, C and D) D and one non-Sena n Bluetooth headset (B).
| Bluetooth Mic & Intercom - If the non-Sena headset does not support a multipoint connection then a phone call connection will be unavailable while using the Universal Intercom. - If the non-Sena headset (that has been paired to the Sena headset) is powered on and is automatically connected, then the multipoint connection of the Sena headset will be deactivated.
| Bluetooth Mic & Intercom 13.
| Bluetooth Mic & Intercom Bluetoo oth Pairing Procedure P ① Interc com Pairing ② Interc com Pairing ③ Mobille Phone Pairing Usage o Bluetooth Audio Pack:: taking pictu ures, video re ecording with h remote aud dio • Prism or • Mobile phone: phon ne call, listen ning to music c • Interco om
| Bluetooth Mic & Intercom 14.
| Bluetooth Mic & Intercom - - 1 sec (+) Button or (- Track ) Button forward/back (병합) CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
| Bluetooth Mic & Intercom compliance could void user’s authority to operate the equipment. CE Declaration of Conformity This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). Hereby, Sena declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please consult www.SenaBluetooth.com. Please note that this product uses radio frequency bands not harmonized within EU.
| Bluetooth Mic & Intercom WEEE (Waste Electrical and Electronic Equipment ) The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
| Bluetooth Mic & Intercom ● Do not use the product in high-temperatures or apply heat to the product as this may cause damage, explosion, or fire. ● Keep the product dry and away from water. It may damage the product. ● Keep product away from pets or small children. It may damage the product or cause accidents. ● Do not use the product near a microwave oven or a wireless LAN device as this may cause malfunction or interference with the product.
| Bluetooth Mic & Intercom PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Limited Warranty Sena Technologies, Inc. (“Sena”) guarantees the product quality based on the technical specification stated in the product manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture.
| Bluetooth Mic & Intercom you are in sufficient physical condition for using any device which can be used with it. In addition, you must ensure that the product does not limit your abilities and that you are able to use it safely. 4. You must be an adult who can take responsibilities for using the product. 5.
| Bluetooth Mic & Intercom Limitation of Liability TO THE FULL EXTENT ALLOWED BY LAW, SENA EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF I
| Bluetooth Mic & Intercom Free-of-charge Service Sena will provide free-of-charge repair or replacement service for the product when product defects occur within the scope of the product warranty during the warranty period. Charged Service Sena will provide charged repair or replacement service for the product when the product warranty period has been expired or when the product damage is beyond the scope of the product warranty.
| Bluetooth Mic & Intercom 1.0.0 SENA v1.0 www.sena.
