User's Manual

| SMH10R
3
CONTENTS
1. INTRODUCTION
2. PACKAGE CONTENTS
3, INSTALLING THE SMH10R ON YOUR HELMET
4. POWERING ON/OFF AND CHARGING
4.1 Powering On
4.2 Powering Off
4.3 Charging
4.4 Low Battery Warning
4.5 Checking the Battery Level
5. VOLUME ADJUSTMENT
6. SMH10 CONFIGURATION SETTING
6.1 Enabling/Disabling Voice Activated Phone Answering
6.2 Enabling/Disabling Voice Activated Intercom
6.3 Enabling/Disabling Voice Prompts
6.4 Enabling/Disabling PLC (Packet Loss Consealment)
6.5 Delete All Bluetooth Pairing Information
6.6 Exit Voice Configuration Menu
7. PAIRING THE SMH10R WITH BLUETOOTH DEVICES
7.1 Mobile Phone Pairing
7.2 Bluetooth Stereo Device Pairing
7.3 Bluetooth GPS Navigation Pairing
7.4 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter
8. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
8.1 A2DP Stereo Music Only
8.2 HFP for Phone Call Only
9. INTERCOM PAIRING
9.1 Pairing with Other SMH10R Headsets for Intercom Conversation
9.2 Pairing with Other SENA Headset Models for Intercom Conversation
10. FUNCTION PRIORITY
11. STEREO MUSIC
11.1 By Bluetooth Wireless Stereo
12. MOBILE PHONE CALL MAKING AND ANSWERING
13. TWO-WAY INTERCOM
13.1 Start and End Two-way Intercom
13.2 Intercom and Mobile Phone Call
13.3 Intercom and GPS
13.4 Intercom and Two-way Radio
14. THREE-WAY CONFERENCE INTERCOM
14.1 Start Three-way Intercom
14.2 End Three-way Intercom
15. FOUR-WAY CONFERENCE INTERCOM
15.1 Start Four-way Intercom
15.2 End Four-way Intercom
16. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
17. INTERCOM FAILURE
18. INTERCOM RECONNECTION
19. FAULT RESET
20. FIRMWARE UPGRADE
21. CASE STUDY