User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. PACKAGE CONTENTS
- 3. INSTALLING THE SMH10R ON YOUR HELMET
- 4. POWERING ON/OFF AND CHARGING
- 5. Volume Adjustment
- 6. SMH10R CONFIGURATION SETTING
- 6.1 Mobile Phone Pairing
- 6.2 Multipoint Pairing
- 6.3 Phone Selective Pairing
- 6.4 Media Selective Pairing
- 6.5 Enabling/Disabling Voice Activated Phone Answering
- 6.6 Enabling/Disabling Voice Activated Intercom
- 6.7 Setting VOX Sensitivity
- 6.8 Enabling/Disabling Voice Prompts
- 6.9 Delete All Bluetooth Pairing Information
- 6.10 Reset to Factory Default Setting
- 6.11 Exit Voice Configuration Menu
- 7. PAIRING THE SMH10 WITH BLUETOOTH DEVICES
- 8. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
- 9. Intercom Pairing
- 10. FUNCTION PRIORITY
- 11. STEREO MUSIC
- 12. MOBILE PHONE CALL MAKING AND ANSWERING
- 13. TWO-WAY INTERCOM
- 14. THREE-WAY CONFERENCE INTERCOM
- 15. FOUR-WAY CONFERENCE INTERCOM
- 16. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- 17. INTERCOM FAILURE
- 18. INTERCOM RECONNECTION
- 19. FAULT RESET
- 20. FIRMWARE UPGRADE
| SMH10R
21
15. FOUR-WAY CONFERENCE INTERCOM
15.1 Start Four-way Intercom
You can have four-way conference intercom with three other SMH10 users by adding one more intercom participant to
the three-way intercom. While you are having three-way intercom as above in section 14.1, a new participant (D), who is
an intercom f riend of your i ntercom friend ( C), m ay join t he c onference i ntercom b y m aking an intercom c all t o your
intercom friend (C). Please note that in this case, the new participant (D) is an intercom friend of (C), not of you (A).
15.2 End Four-way Intercom
As sa me i n t he c ase of t hree-way intercom, you c an c ompletely get o ut of t he f our-way c onference i ntercom or j ust
disconnect a single intercom connection.
1 Press the Center Button for 1 second until you hear a beep to terminate four-way conference intercom. It terminates
the intercom connections between you (A), and your intercom friends (B) and (C).
2 Press once or twice the Center Button to disconnect t he intercom connection with one of the two intercom friends
accordingly. However, w hen you d isconnect t he s econd friend ( C) b y P ress t he C enter B utton t wice, you will be
disconnected with the third participant (D) as well. This is because the third participant (D) is connected with you via
the second friend (C).
Center Button
Result
Press for 1”
Disconnect (B), (C) & (D)
Press once
Disconnect (B)
Press twice
Disconnect (C) & (D)
End Four-way Intercom
16. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM
PARTICIPANT
You can have a three-way conference phone call by adding an intercom friend to the mobile phone conversation. While
having a mobile phone call, make an intercom call to one of the intercom friends by press the Center Button to form a
three-way conference call with the person on the mobile phone line. To disconnect the intercom first and go back to your
private m obile phone c all, terminate t he i ntercom b y press t he C enter B utton. To en d t he m obile p hone c all f irst and
maintain the intercom conversation, press the Center Button for 2 seconds, or wait for the person on the mobile phone
line to end the call.