User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. PACKAGE CONTENTS
- 3. INSTALLING THE SMH10R ON YOUR HELMET
- 4. POWERING ON/OFF AND CHARGING
- 5. Volume Adjustment
- 6. SMH10R CONFIGURATION SETTING
- 6.1 Mobile Phone Pairing
- 6.2 Multipoint Pairing
- 6.3 Phone Selective Pairing
- 6.4 Media Selective Pairing
- 6.5 Enabling/Disabling Voice Activated Phone Answering
- 6.6 Enabling/Disabling Voice Activated Intercom
- 6.7 Setting VOX Sensitivity
- 6.8 Enabling/Disabling Voice Prompts
- 6.9 Delete All Bluetooth Pairing Information
- 6.10 Reset to Factory Default Setting
- 6.11 Exit Voice Configuration Menu
- 7. PAIRING THE SMH10 WITH BLUETOOTH DEVICES
- 8. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
- 9. Intercom Pairing
- 10. FUNCTION PRIORITY
- 11. STEREO MUSIC
- 12. MOBILE PHONE CALL MAKING AND ANSWERING
- 13. TWO-WAY INTERCOM
- 14. THREE-WAY CONFERENCE INTERCOM
- 15. FOUR-WAY CONFERENCE INTERCOM
- 16. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- 17. INTERCOM FAILURE
- 18. INTERCOM RECONNECTION
- 19. FAULT RESET
- 20. FIRMWARE UPGRADE
| SMH10R
18
- Enter num bers on your m obile pho ne k eypad a nd make a c all. T hen t he c all i s aut omatically t ransferred t o t he
headset.
- Press the Center Button in stand-by m ode t o activate t he v oice dialing of your m obile phone. For this, the voice
dialing feature must be available on the mobile phone. Refer to your mobile phone manual for further instruction.
- To redial the last number, press the (+) button for 3” in stand-by mode. You will hear a voice prompt saying “Last
number redial”.
Mobile Phone Call Button Operations
Answer
Press the Center Button or Say “Hello”
End
Press the Center Button for 2”
Reject
Press the Center Button for 2”
Transfer
Must be done on the mobile phone
Call
Use phone keypad
Redial
Press the (+) button for 3”
Voice Command
Press the Center Button for 3”
Note:
1. If you are using multipoint mobile phone connection and you have an incoming call from the second phone during the
call of the first phone, then you may still receive the call from second phone. In this case, the call from the first phone is
on waiting mode. If you end a call, then it will automatically guide you to the first phone call.
2. If you are using multipoint connection of mobile phone and GPS, you may not listen to the GPS voice instruction during
the phone call.
13. TWO-WAY INTERCOM
13.1 Start and End Two-way Intercom
1. You c an s tart an intercom c onversation with one of an y i ntercom friends b y press t he C enter B utton: p ress onc e to
intercom with the first intercom friend, press twice with the second intercom friend, and press three times with the
third intercom friend.
2. To t erminate a n i ntercom c onversation, press onc e t he C enter B utton. A ny intercom c onnection with any intercom
friend will be terminated by press the Center Button. A twice or three times of press will do nothing in this case.
1st intercom friend
2nd intercom friend
3rd intercom friend
Start intercom
Press once
Press twice
Press three times
End intercom
Press once
Press once
Press once
Start & End Two-way Intercom
13.2 Intercom and Mobile Phone Call
1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can
choose whether to 1) answer the mobile phone call and stop the intercom conversation, or 2) reject the phone call and
stay on the intercom conversation.
a To answer the phone c all and s top t he intercom conversation, Press the Center Button once.. T he phone VOX
feature d oes n ot work i f you ar e c onnected t o intercom. When you hang up t he ph one c all, t he i ntercom will
automatically be recovered.