User's Manual

| SMH10R
16
9. Intercom Pairing
9.1 Pairing with Other SMH10R Headsets for Intercom Conversation
The SMH10R can be paired with up to three other headsets for Bluetooth intercom conversation.
1 Turn on the two SMH10R headsets (A and B) that you would like to pair with each other.
2 Press and hold the Center Button for 5 seconds, then you will hear mid-tone single beep and a voice prompt saying
“Intercom pairing”
3 Simply press the Center Button of any one of the two headsets A or B (It doesn’t matter that you choose A or B.) and
wait u ntil t he LE Ds of bot h hea dsets t urn t o b lue a nd i ntercom c onnection i s automatically established. The t wo
SMH10R he adsets A an d B are paired with e ach other f or intercom c onversation. I f t he pairing pr ocess i s not
completed within one minute, the SMH10R will return to stand-by mode.
Pairing A & B
4. You can make other pairings between the headset A and C, and between the headset A and D by following the same
procedure as above.
Pairing A & C Pairing A & D
5. The intercom pairing queue is ‘Last-Come, First-Served’. If a headset has multiple paired headsets for intercom
conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second
intercom friend, and third intercom friend.
Note:
For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is
the second intercom friend of headset A, and headset B is the third intercom friend of headset A.