User's Manual

| SMH10R
13
VOX Intercom
Enable / Disable
VOX Sensitivity
- Set up value of 1 /2 / 3 / 4 / 5
or Cancel
- Enter Value
Adjustment mode
- Save and exit
Voice prompt
Enable / Disable
Delete All Pairings
Execute
Factory Reset
Execute
Exit Configuration
Execute
Voice Configuration Menu & Button Operations
7. PAIRING THE SMH10 WITH BLUETOOTH DEVICES
Before using the SMH10R Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing
operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, or motorcycle specific
Bluetooth GPS, and with other Sena Bluetooth headsets. This pairing operation is only required once for each Bluetooth
device. The headset will remain paired with the devices and automatically connects to the paired devices again when they
are within r ange. You will hear a high t one s ingle beep and a v oice pr ompt when t he he adset c onnects t o t he paired
device automatically: “Phone connected” to a mobile phone, “Media connected” to a Bluetooth stereo device.
7.1 Mobile Phone Pairing
7.1.1 Mobile Phone Pairing
1 To enter into voice configuration menu, press and hold the Center Button for 10 seconds until you will hear a voice
prompt saying “Configuration menu”.
2 Press the (+) Button once and you will hear a voice prompt saying “Mobile phone pairing”.
3 Search for Bluetooth devices on your mobile phone. Select the Sena SMH10R in the list of the devices detected on
the mobile phone.
4 Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
5 The mobile phone confirms that pairing has completed and the SMH10R is ready to use. You will hear a voice
prompt from the SMH10R saying “Your headset is paired”.
6 If the pairing process is not completed within three minutes, the SMH10R will return to stand-by mode.
7.1.2 Multipoint Mobile Phones Pairing
You can simultaneously use two mobile phones which use the mobile phone profile.
1 You can pair the first mobile phone to the SMH10R by following the simple procedures in “6.1.1 Mobile Phone
Pairing”.
2 To paring secondary mobile phone, Press the Center Button with 10” to entering into configuration menu.
3 Press the (+) Button twice then you will hear a voice prompt saying “Multipoint pairing”.
4 Search for Bluetooth devices on your mobile phone. Select the Sena SMH10R in the list of the devices detected on
the mobile phone.
5 Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
6 The mobile phone confirms that pairing has completed and the SMH10R is ready to use. You will hear a voice
prompt from the SMH10R saying “Your headset is paired”.