User's Manual

| SMH10R
12
You can disable voice prompts by configuration setting, but the following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
6.9 Delete All Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default
N/A
Execute
Press the Center Button
To delete all Bluetooth pairing information of the SMH10R, press the (+) Button or the (-) Button until you hear a voice
prompt, “Delete all pairings”, and press the Center Button to confirm.
6.10 Reset to Factory Default Setting
Voice Prompt
“Factory Reset”
Factory Default
N/A
Execute
Press the Center Button
To r estore factory default s etting of t he SMH10R, press t he ( +) B utton or t he ( -) B utton u ntil you h ear a voice pr ompt,
“Factory reset”, and press the Center Button to confirm then SMH10R will power off with a voice prompt saying “Headset
reset, good-bye”.
6.11 Exit Voice Configuration Menu
Voice Prompt
“Exit configuration”
Factory Default
N/A
Execute
Press the Center Button
To exit voice configuration menu and get back to stand-by mode, press the (+) Button or (-) Button until you hear a voice
prompt, “Exit configuration”, and press the Center Button to confirm.
Press (+) Button or (-) Button
Press Center Button
Phone Pairing
None
Multipoint Pairing
None
Phone Selective Pairing
None
Media Selective Pairing
None
VOX Phone
Enable / Disable