User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. PACKAGE CONTENTS
- 3. INSTALLING THE SMH10R ON YOUR HELMET
- 4. POWERING ON/OFF AND CHARGING
- 5. Volume Adjustment
- 6. SMH10R CONFIGURATION SETTING
- 6.1 Mobile Phone Pairing
- 6.2 Multipoint Pairing
- 6.3 Phone Selective Pairing
- 6.4 Media Selective Pairing
- 6.5 Enabling/Disabling Voice Activated Phone Answering
- 6.6 Enabling/Disabling Voice Activated Intercom
- 6.7 Setting VOX Sensitivity
- 6.8 Enabling/Disabling Voice Prompts
- 6.9 Delete All Bluetooth Pairing Information
- 6.10 Reset to Factory Default Setting
- 6.11 Exit Voice Configuration Menu
- 7. PAIRING THE SMH10 WITH BLUETOOTH DEVICES
- 8. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
- 9. Intercom Pairing
- 10. FUNCTION PRIORITY
- 11. STEREO MUSIC
- 12. MOBILE PHONE CALL MAKING AND ANSWERING
- 13. TWO-WAY INTERCOM
- 14. THREE-WAY CONFERENCE INTERCOM
- 15. FOUR-WAY CONFERENCE INTERCOM
- 16. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- 17. INTERCOM FAILURE
- 18. INTERCOM RECONNECTION
- 19. FAULT RESET
- 20. FIRMWARE UPGRADE
| SMH10R
10
Press the (+) Button or t he ( -) Button until you h ear a v oice prompt, “ Multipoint pairing” t o select a m ultipoint p airing
menu. I f t his f unction i s s elected, the S MH10R will enter m ultipoint pa iring m ode f or your m obile ph one or B luetooth
devices such as MP3 and GPS. Please refer to the section 7.1 or 7.3 for details on multipoint pairing. If you press the (+)
or (-) Button for menu navigation, it will stop the pairing operation.
6.3 Phone Selective Pairing
Voice Prompt
“Phone selective pairing”
Factory Default
N/A
Enable / Disable
Press the Center Button
Press the (+) Button or the (-) Button until you hear a voice prompt, “Phone selective pairing” to select a phone selective
pairing menu. If this function is selected, the SMH10R will start phone selective pairing. Please refer to the section 8 for
details on phone selective pairing. If you press the (+) or (-) Button for menu navigation, it will stop the pairing operation.
6.4 Media Selective Pairing
Voice Prompt
“Media selective pairing”
Factory Default
N/A
Enable / Disable
Press the Center Button
Press the (+) Button or the (-) Button until you hear a voice prompt, “Media selective pairing” to select a media selective
pairing menu. If this function is selected, the SMH10R will start media selective pairing. Please refer to the section 8 for
details on media selective pairing. If you press the (+) or (-) Button for menu navigation, it will stop the pairing operation.
6.5 Enabling/Disabling Voice Activated Phone Answering
Voice Prompt
“VOX phone”
Factory Default
Enable
Enable / Disable
Press the Center Button
Press t he ( +) Button or the ( -) B utton unt il you h ear a voice pr ompt, “ VOX Phone”. If t his f eature is e nabled, you c an
answer incoming calls by simply saying a word loudly enough, unless you are connected to intercom. For example, when
you hear a series of beeps for an incoming call, you can answer the phone by saying “Hello” or any other word loudly.
However, the phone VOX feature does not work if you are connected to intercom. This is enabled from the factory but you
can disable this. If this mode is disabled, you have to press the Center Button to answer an incoming call.