| SMH10R SMH10R Low Profile Motorcycle Bluetooth Headset & Intercom SENA www.senabluetooth.
| SMH10R © 1998-2012 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH5™, SPH10™, SPH10S™, SPH10H™, SR10™, SM10™, SMH10R™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena.
| SMH10R CONTENTS 1. INTRODUCTION 2. PACKAGE CONTENTS 3, INSTALLING THE SMH10R ON YOUR HELMET 4. POWERING ON/OFF AND CHARGING 4.1 Powering On 4.2 Powering Off 4.3 Charging 4.4 Low Battery Warning 4.5 Checking the Battery Level 5. VOLUME ADJUSTMENT 6. SMH10 CONFIGURATION SETTING 6.1 Enabling/Disabling Voice Activated Phone Answering 6.2 Enabling/Disabling Voice Activated Intercom 6.3 Enabling/Disabling Voice Prompts 6.4 Enabling/Disabling PLC (Packet Loss Consealment) 6.
| SMH10R BATTERY INFORMATION MAINTENANCE AND CARE DISPOSAL CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement FCC RF Exposure Statement FCC Caution CE Declaration of Conformity Industry Canada Statement Bluetooth License WAIVER AND GENERAL RELEASE Two-Year Limited Warranty Limitation of Liability Return for Full Refund WARNING 4
| SMH10R 1. INTRODUCTION Thank you f or c hoosing t he S ena S MH10R, B luetooth S tereo H eadset an d I ntercom for s ports bi ke riders. W ith the SMH10R, you c an c all h andsfree on your B luetooth mobile pho ne, l isten t o s tereo m usic or v oice i nstructions of G PS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other sports bike riders. The S MH10R is c ompliant w ith t he B luetooth 3 .
| SMH10R 2.
| SMH10R Speakers Attachable Boom Microphone Wired Microphone Battery Pack Speaker Pad Attachable Boom Microphone Holder Velcro Pad for Boom Microphone Velcro Pad for Speaker Velcro Pad for Boom Microphone Holder Velcro Pad for Wired Microphone Velcro Pads for Battery Pack Mounting Cradle Microphone Sponge USB Power & Data Cable 3. INSTALLING THE SMH10R ON YOUR HELMET To securely install the SMH10R on the helmet, please follow the procedure.
| SMH10R 4. POWERING ON/OFF AND CHARGING To power on and off the headset, press the Center Button and the + Button at the same time for about 1 second to power on, and you will get quick on-and-off convenience. 4.1 Powering On Press the Center Button and the + Button at the same time for about 1 second to power on. The blue LED turns on and you will hear ascending beeps. 4.2 Powering Off Just short press the Center Button and the + Button simultaneously, you don’t need to press and hold for a few seconds.
| SMH10R 6. SMH10R CONFIGURATION SETTING You can set the configuration of the SMH10R by the voice menu instruction as below. 1 2 3 4 To enter into voice configuration menu, press and hold the Center Button for 10 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying “Configuration menu”. Press the (+) Button or (-) Button to navigate between the menus. You will hear voice prompts for each menu items as below.
| SMH10R Press the (+) Button or t he ( -) B utton until you h ear a v oice prompt, “ Multipoint pairing” t o select a m ultipoint p airing menu. I f t his f unction i s s elected, the S MH10R will enter m ultipoint pa iring m ode f or your m obile ph one or B luetooth devices such as MP3 and GPS. Please refer to the section 7.1 or 7.3 for details on multipoint pairing. If you press the (+) or (-) Button for menu navigation, it will stop the pairing operation. 6.
| SMH10R 6.6 Enabling/Disabling Voice Activated Intercom Voice Prompt “VOX intercom” Factory Default Disable Enable / Disable Press the Center Button Press the (+) Button or the (-) Button until you hear a voice prompt, “VOX intercom”. If this feature is enabled, you can initiate an intercom conversation with the last connected intercom friend by speaking any word loudly enough. The most effortless way to trigger intercom VOX is to blow into the microphone as if blowing dust off the microphone.
| SMH10R You can disable voice prompts by configuration setting, but the following voice prompts are always on. - Voice prompts for configuration setting menu - Voice prompts for battery level Indicator - Voice prompts for factory reset 6.
| SMH10R VOX Intercom Enable / Disable VOX Sensitivity - Set up value of 1 /2 / 3 / 4 / 5 or Cancel - Enter Value Adjustment mode - Save and exit Voice prompt Enable / Disable Delete All Pairings Execute Factory Reset Execute Exit Configuration Execute Voice Configuration Menu & Button Operations 7. PAIRING THE SMH10 WITH BLUETOOTH DEVICES Before using the SMH10R Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation.
| SMH10R 7.2 Bluetooth Stereo Device Pairing If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the SMH10R with it separately. When the SMH10R is paired with the mobile phone, it is also paired as a stereo music device. If you have a stand-alone Bluetooth stereo device, follow the pairing procedure separately. The procedure is the same as the procedure of “6.1 Mobile Phone Pairing”.
| SMH10R 7.4 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter The S ena SR10 i s a B luetooth two-way r adio ada pter for gr oup communication, and us es HFP as do most motorcycle specific GPS navigation systems. If you pair the SMH10R with a SR10 by multipoint pairing, the SMH10R is able to have two HFP devices at the same time: mobile phone and Sena SR10.
| SMH10R 9. Intercom Pairing 9.1 Pairing with Other SMH10R Headsets for Intercom Conversation The SMH10R can be paired with up to three other headsets for Bluetooth intercom conversation. 1 Turn on the two SMH10R headsets (A and B) that you would like to pair with each other.
| SMH10R 9.2 Pairing with Other Sena Headset Models for Intercom Conversation The S MH10R c an be paired with a ll ot her S ena headset m odels s uch as t he S MH10, t he SPH10 and t he S MH5 for intercom conversation. Please follow the same procedure as above to pair with these headset models. Note: The SMH5 cannot participate in three-way or four-way conference intercom with the SMH10R or the SMH10.
| SMH10R - Enter num bers on your m obile pho ne k eypad a nd make a c all. T hen t he c all i s aut omatically t ransferred t o t he headset. - Press the Center Button in stand-by m ode t o activate t he v oice dialing of your m obile phone. For this, the voice dialing feature must be available on the mobile phone. Refer to your mobile phone manual for further instruction. - To redial the last number, press the (+) button for 3” in stand-by mode. You will hear a voice prompt saying “Last number redial”.
| SMH10R b To reject the phone call and stay on the intercom conversation, press the Center button for 2 seconds until you hear a beep. Unlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation by an incoming mobile call. 2. When you have an incoming intercom call during a mobile phone call, you will hear 4 high tone beeps, alerting you that there is an incoming intercom call. You will also hear a voice prompt saying “Intercom requested”.
| SMH10R 2 Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). 3 The second intercom friend (C) may join the intercom by making an intercom call to you (A). 4 Now you (A) and two SMH10 intercom friends (B & C) are having a three-way conference intercom. 14.
| SMH10R 15. FOUR-WAY CONFERENCE INTERCOM 15.1 Start Four-way Intercom You can have four-way conference intercom with three other SMH10 users by adding one more intercom participant to the three-way intercom. While you are having three-way intercom as above in section 14.1, a new participant (D), who is an intercom f riend of your i ntercom friend ( C), m ay join t he c onference i ntercom b y m aking an intercom c all t o your intercom friend (C).
| SMH10R Start Press the Center Button while having a mobile phone call End intercom first Press the Center Button End phone call first Press the Center Button for 2” or Wait for the called person to end the call Start & End Three-way Conference Phone Call 17.
| SMH10R 21.
| SMH10R BATTERY INFORMATION The SMH10R has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard.
| SMH10R CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ● This device may not cause harmful interference. ● This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC R ules.
| SMH10R The S MH10R is c ompliant w ith a nd adopts t he B luetooth® Specification version 3. 0 and has s uccessfully passed a ll interoperability tests that are specified in the Bluetooth® specification. However, interoperability between the device and other Bluetooth®-enabled products is not guaranteed. WAIVER AND GENERAL RELEASE By using the SMH10R you waive all substantial legal rights including the right to sue. Please read the following carefully before using the device.
| SMH10R 5 You c onfirm t hat you h ave r ead t his r elease of l iability and f ully understand i ts t erms and t hat you have given up substantial rights by not returning the Device for a full refund (see refund option below). Two-Year Limited Warranty Sena Technologies, Inc.
| SMH10R SENA www.senabluetooth.com 28 User's Guide for Firmware v1.
