User's Manual

| SMH5

PAIRING WITH SELECTIVE PROFILE: A2DP STEREOOR HANDSFREE

If you have a MP3 stereo music phone such as a Smartphone, sometimes you may need to selectively use the SMH5 for

A2DP stereo music only or for mobile phone hands-free only. This instruction is for advanced users who want to pair the

SMH5 to their Smartphones only with one selective profile: A2DP Stereo for music or HFP for phone call.

If it is not the first time to do paring with the mobile phone, you have to clear the previous paring list on both devices; the

mobile phone and SMH5. To clear pairing list on SMH5, please do factory reset described on the page 21.To clear pairing

list on the mobile phone, please refer to the mobile phone manual.

A2DP Stereo Music Only

1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and

you hear multiple beeps.

2. Within 2 seconds, tap the Jog Dial again, then the LED turns to red flashing and the beeps turn to double mid-tone

beeps.

3. Search for Bluetooth devices on your smart phone. The headset will be listed on your mobile phone as SMH5.

4. Enter 0000 for the PIN. Some smart phones may not ask for PIN.

HFP for Phone Call Only

1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and

you hear multiple beeps.

2. Within 2 seconds, tap the Phone Button again, then the LED turns to blue flashing and the beeps turn to multiple

mid-tone beeps.

3. Search for Bluetooth devices on your smartphone. The headset will be listed on your mobile phone as SMH5.

4. Enter 0000 for the PIN. Some smart phones may not ask for PIN.