User's Manual

| SMH5
15
while pressed
Number(ex.
One)
Scan Start
Phone Button
2 tab
stay for 8"
Scan Stop
Phone Button
2 tab
Save Preset
while Scan
Phone Button
tab
save and stop
scanning
high-tone double
Preset
Number(ex.
One)
Temporary
Preset
Phone Button
3 tab
Fault Reset
When the SMH5 is not working properly or is in faulty status with any reason, you may reset by pushing the pin-hole reset
button at the back of the headset main unit. Insert a paper clip into the reset pin-hole and press the reset button for a
second with light pressure. The SMH5 will be switched off and you have to turn on and try to use again. However, this will
not restore the headset to factory default settings.