User's Manual

| SMH5
14
Function Priority
The SMH5 operates in the following order of priority:
(highest) Mobile phone,
Intercom,
Stereo music by audio cable, and
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by
intercom call, and intercom conversation is interrupted by incoming mobile phone call.
Tip: Stereo Music by Bluetooth or 3.5mm audio cable
Bluetooth music is available only when the MP3 jack port remains open. Please make sure the audio cable is unplugged
from the clamp unit to play music by Bluetooth
Tip: Stereo Music by Bluetooth or 3.5mm audio cable
Reset to Factory Default Settings
1. To restore the SMH5 to factory default settings, press and hold the Phone Button for 12 seconds until the LED shows
solid red and you hear double beeps.
6. Then within 5 seconds, press the Jog Dial to confirm reset. The headset will be restored to factory setting and
switched off automatically.
7. If you don’t press the Jog Dial within 5 seconds, the reset attempt is canceled and the headset returns to stand-by
mode.
FM Radio
Operation
Button
Duration
Description
Beep
Voice
Prompt
Basic
FM On
Phone Button
2"
until double beep,
when released
mid-tone double
FM On
FM Off
Phone Button
2"
until double beep,
while pressed
mid-tone double
FM Off
Volume Up
Jog Dial
rotation
Volume Down
Jog Dial
rotation
RDS Set
Jog Dial
15"
until double beep,
while pressed
high-tone double
RDS
RDS On/Off
Phone/Jog
tab
enable=phone,
disable=jog
enable=mid-tone double
disable=mid-tone single
enabled/dis
abled
Tune
Seek Up
Jog Dial
push+rotation
high-tone triple
Seek Down
Jog Dial
push+rotation
high-tone triple
Select Preset
Phone Button
tab
1~6 rotation
mid-tone single
Preset
Number(ex.
One)
Save Preset
Jog Dial
3"
until double beep,
high-tone double
Preset