User's Manual

| SMH5
13
Tip:
The Jog Dial is for any kind of Intercom related function, and the Phone Button is for any functions of mobile phone. With
this reason, as far as intercom function is concerned, the Jog Dial is used for a positive manner of action such as
enabling, and the Phone Button is for a negative manner of action such as disabling. Vice versa for the mobile phone
functions.
Intercom Failure
When you try to start an intercom conversation with an Intercom Friend who is already having a 3-way conference
intercom with other persons or a mobile phone call, you will hear a low tone double beep signifying a busy signal. In this
case, you have to try again later.
Intercom Reconnection
If your Intercom Friend goes out of range while having an intercom conversation, you may hear static noise and
eventually the intercom will be disconnected. In this case, the SMH5 automatically tries to reconnect the intercom every 8
seconds and you will hear high tone double beeps until the intercom is reestablished. If you don’t want to make a
reconnection, tap the Jog Dial to stop the attempt.
Stereo Music
1. By Bluetooth Wireless Stereo
The Bluetooth audio device must be paired with the SMH5 by following the Bluetooth Audio Device Pairing
instructions described in the previous chapter. The SMH5 supports the Audio/Video Remote Control Profile (AVRCP),
so if your Bluetooth audio device also supports the AVRCP, you can use the SMH5 to remotely control music
playback. So, you may not only adjust the volume but also use the functions such as play, pause, next track and
previous track.
● To adjust the volume, rotate the Jog Dial.
● To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep.
● To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise.