User's Manual

| SMH5
11
Enabling/Disabling Voice Activated Phone Answering (Factory Default: Disabled)
If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough. For example, when you
hear a series of beeps by an incoming call, you can answer the phone by saying “Hello” or any other word loudly. The
factory default setting is disabled. You can enable or disable this mode. If this mode is disabled, the only way to answer
an incoming call is to tap the Phone Button.
1. Press and hold the Phone Button for 8 seconds until the red LED is rapidly flashing. When you do this, after first 5
seconds you press the button, you will see the headset enters into the Mobile Phone Pairing sequence, but you have
to keep pressing the button for another 3 seconds until the red LED flashes rapidly.
2. To enable, tap the Phone Button, then the LED shows solid blue for 2 seconds and you will hear double beeps.
3. To disable, tap the Jog Dial, then the LED shows solid red for 2 seconds and you will hear a single beep.
Intercom Conversation
1. You can start an intercom conversation with any of Intercom Friends by tapping the Jog Dial: single tapping to
intercom with the First Intercom Friend, double tapping with the Second Intercom Friend, and triple tapping with
the Third Intercom Friend.
2. To terminate an intercom conversation, single tap the Jog Dial. Any intercom connection with any Intercom Friend will
be terminated by a single tapping.
3. When you have an incoming phone call during intercom conversation, you can choose whether to pick up the call or
not after you hear the ring tone.
4. When you have an incoming intercom call during a mobile phone conversation, you will hear high tone 4 beeps. You
have to hang up the mobile phone to make an intercom connection.
Enabling/Disabling Voice Activated Intercom (Factory Default: Disabled)
If this feature is enabled, you can initiate an intercom conversation with the last connected Intercom Friend by speaking
any word loudly enough.The most effortless way to trigger intercom VOX is to blow into the microphone as if blowing dust
off the microphone.If you start an intercom conversation by VOX,the intercom terminates automatically whenyou and your
Intercom Friend remain silent for 20 seconds. However, if you manually start an intercom conversation by tapping the Jog
Dial, you have to terminate the intercom conversation manually by tapping the Jog Dial again.
If this feature is disabled, the only way to initiate and terminate an intercom conversation is to tap the Jog Dial.