User's Manual

| SR10

USING THE SR10

Using 2-way Radio Devices

1. When SR10 is turned on and connected with the 2-way radio device, the audio from the

2-way radio will be directly sent to your Bluetooth Headset.

2. To talk using the 2-way radio through SR10, press and hold the PTT button or wired PTT

button until you finish talking.

Installing Wired PTT Button

1. Installing on handlebar: Place the PTT button on the handlebar where you can easily

reach it; wind up the rubber on handlebar and hang it on the hook.

2. Installing on your hand: Place the PTT button on your finger; wind up the rubber on your

finger and hang it on the hook.

Auxiliary Devices

The SR10 has three input ports for wired connection with other devices. Below is a list of

connectable devices:

 Main: Mini-DIN, 2-way radio devices

 AUX1: 3.5mm 3-pole audio jack, MP3 players, GPS navigations, Radar detectors

 AUX2: 3.5mm 4-pole audio jack, Mobile phones, GPS navigations, Radar detectors

Using Mobile Phone

For Bluetooth Wireless Connection

Once your Bluetooth Headset is paired with the SR10, you will be able to hear a ring from

incoming calls. To answer the call, refer to your Bluetooth Headset’s Users Guide.