User's Manual

| SR10

PAIRING THE SR10 WITH BLUETOOTH DEVICES

Before pairing with Bluetooth devices, SR10 must be in Pairing mode. SR10 can be switched

to pairing mode by pressing the pairing button for 3 seconds. When SR10 is in pairing mode,

the blue LED light will flash, and SR10 is now ready to pair with other devices.

Bluetooth Headset Pairing

1. Turn on the Bluetooth Headset and enter pairing mode, following your Bluetooth

Headset manual.

2. Turn on the Bluetooth Adapter and press the pairing button for 3 seconds until the LED

flashes red and blue alternatively.

3. When the pairing is successful, the blue LED light on the SR10 flashes slowly (Please

refer to the Quick Reference Guide).

Mobile Phone Pairing

1. Turn on the Bluetooth Adapter and press and hold the pairing button for 6 seconds until

the red LED is rapidly flashing. Search for Bluetooth devices on your mobile phone. The

Bluetooth Adapter will be listed on your mobile phone as SR10.

2. Enter 0000 for the PIN. (Some mobile phone may not ask for the PIN number)

3. The Bluetooth Adapter will be paired as Headset. This profile is normally recommended

for most mobile phones.

4. When the pairing is done, the RED LED light flashes slowly. (Please refer to the Quick

Reference)