User's Manual

67
Figure 4-15 Modem configuration
4.2.8. Port Logging
With the port logging feature, the data sent through the serial port is stored to MEMORY or a mounting
point on an NFS server.
z Enable/disable port logging
This parameter defines whether to enable or disable the port-logging feature. The factory default
setting is [disabled].
z Port log storage location
The port log data can be stored to the Pro Series’ internal memory or the mounting point on an
NFS server. If the internal memory is used to store port log data, the port log data will be cleared
when the Pro Series is turned off. To preserve the serial port log data, set the storage location to
be the NFS server. To do this, the user must configure the NFS server in advance. Please refer to
서식 있음: 글머리 기호 및
번호 매기기
삭제됨:
삭제됨:
삭제됨:
삭제됨: