User's Manual

4.3.2.1.5. Network service

The available options are as follows:

z Network service mode

The available mode is server, client and tunneling. If the server is selected, the Parani-MSP1000

waits for incoming connection. If the client is selected, the Parani-MSP1000 tries to connect to

remote hosts. If the tunneling is selected, the Parani-MSP1000 waits for incoming connection, but

when there is data received from SPP and there is no incoming connection, the Parani-MSP1000

tries to connect to remote host.

z Service protocol

When the network service mode is server or client, the available protocols are RawTCP, SSL,

Telnet and SSH. When the network service mode is tunneling, the available protocols are

RawTCP, SSL.

z Inactivity timeout

If there is no data for a long time, the network session will be terminated by this timeout.

z Local port number / Base port number

When the network service mode is server or tunneling, a TCP port number is required for

incoming connection. When the operation mode is “Initiate/accept connection to/from specific

devices”, the local port number is configurable and when the operation mode is the other, the

base port number is configurable. The Parani-MSP1000 allocates a TCP port number for a

Bluetooth connection. The allocated TCP port number is based on the base port number and

increases by 1.

Note: Be careful in setting up the base port number not to overlap with other network,

z Authentication

When the network service mode is server, the Parani-MSP1000 requires the incoming connection

to login.

z Users allowed to access

The only users registered in this option are able to login the network service.

z Primary/Secondary remote host & port

When the network service mode is client or tunneling, the Parani-MSP1000 attempts to connect to

these hosts.

z Username & Password

When the network service mode is client and the remote hosts requires the Parani-MSP1000 to

the Parani-MSP1000 doesn’t try to login.

z Periodic connection

When the network service mode is client, the Parani-MSP1000 attempts to create outgoing