User's Manual

24
4. Bluetooth Configuration
4.1. Overview
4.2. Device Configuration
This menu is the configuration for the Bluetooth devices embedded in the Parani-MSP1000.
z Bluetooth friendly name
The device name. %h inserts the host name (device name) configured in the Device name
configuration. %d inserts the device id.
z Inquiry scan
When this is enabled, the Parani-MSP1000 is “discoverable.”
z Page scan
When this is enabled, the Parani-MSP1000 is “connectable to.”
z Authentication
When this is enabled, the Parani-MSP1000 require pass key (PIN code) for incoming connection.
If the pass key is incorrect, the connection will be rejected.
z Pass key
The pass key is also called as “PIN code.” This pass key is used for incoming and outgoing
connections both.
z Encryption
When this is enabled, the Parani-MSP1000 apply encryption to all Bluetooth connections.
z Available Bluetooth devices
The information of all the built-in Bluetooth devices is displayed.
4.3. Serial Port Profile (SPP) Configuration
The Bluetooth devices that support Serial Port Profile are able to connect with the Parani-MSP1000. In
order to use the SPP, first of all, the operation mode should be selected.
4.3.1. Operation mode
The operation mode option is as follows:
z Disable
The SPP will be disabled.
z Initiate connection to unspecific devices
The Parani-MSP1000 scans neighborhood Bluetooth devices, and initiates connection to them.