User's Manual
13
Parity None
Stop bits 1
No flow control
4) Press the [ENTER] key.
5) Enter your username and password to log into the Parani-MSP1000. The factory default user
settings are as follows.
Login: root Password: root
6) After login, users can use various shell commands in the CLI(Command Line interface). For
details on the CLI, refer to the chapter 9, “CLI Guide”.
7) “editconf” command will allow you to enter the text-menu driven interface and the menu
screen in #editconf
[root@MSP1000 /]# editconf
-------------------------------------------------------------------------------
Welcome to MSP1000 configuration page
Current Time : 7/14/2007 12:22:56 Serial No. : msp1000-test1234
F/W Rev. : v1.0.0 MAC Addr.(eth0) : 00:01:95:AF:BF:DD
IP Mode (eth0) : Static IP Addr.(eth0) : 192.168.161.5
-------------------------------------------------------------------------------
1. Network configuration
2. System administration
3. System status & log
4. CF card configuration
5. Monitoring
6. Save changes
7. Exit without saving
8. Exit and apply changes
9. Exit and reboot
<ESC> Back, <ENTER> Refresh
--> 1
8) Select menu 1. [Network Configuration] and then proceed to [Ethernet 0] configuration to set
up the IP address of the box. Users may set up the network configuration according to their
environment. Once network set-up is done, users may access the box through telnet/ssh
connection or by web browser.
-------------------------------------------------------------------------------
Network Configuration
-------------------------------------------------------------------------------
1. ETHERNET 0 (eth0) configuration
2. ETHERNET 1 (eth1) configuration
3. Firewall configuration
4. TCP configuration
<ESC> Back, <ENTER> Refresh
--> 1
-------------------------------------------------------------------------------
ETHERNET 0 (eth0) configuration
-------------------------------------------------------------------------------
1. IP mode: Static IP
2. IP address: 192.168.14.123
3. Subnetmask: 255.255.0.0
4. Gateway: 192.168.1.1
5. Primary DNS: 168.126.63.1
6. Secondary DNS: 168.126.63.2
<ESC> Back, <ENTER> Refresh
-->