User's Manual

12
z Remote console
Users who require a menu-driven interface remotely can utilize Telnet (port 23) or SSH (port 22)
connections to the Parani-MSP1000 using Telnet or SSH client. The menu-driven user interface
provides limited functions for initial configuration.
NOTE : Please note that Parani-MSP1000 supports only the SSH v2, so user must use the SSH
client which is able to support SSH v2.
z Web
Remote users who want to use a web browser to configure the Parani-MSP1000 can connect to
the Parani-MSP1000 using a conventional web browser, such as Internet Explorer or Firefox
Navigator. Easy-to-use menu-driven user interface provides full-featured configuration functions
for the mean-time configuration purpose.
2.4.1. Configurations using RS232 serial connection
1) Connect one end of the console cable to the console port on the Parani-MSP1000.
Figure 2-3 Connecting a system console cable to the Parani-MSP1000
2) Connect the other end of the cable to the serial port of the user’s computer.
3) Run a terminal emulator program (i.e. HyperTerminal). Set the serial configuration
parameters of the terminal emulation program as follows:
 9600 Baud rate
 Data bits 8