User's Manual

10
2. Getting Started
2.1. External View
2.2. LED Indicators
The Parani-MSP100 has a number of LED indicator lamps for status display. Table 2-1 describes
function of each LED indicator lamp
Table 2-1 LED indicator lamps
Lamps Function
Ethernet 0
Blinks whenever there is any activity on the Ethernet 0 port
Ethernet
Ethernet 1
Blinks whenever there is any activity on the Ethernet 1 port
Signal Strength
?
Bluetooth
# of Bluetooth
Connections
Shows the number of Bluetooth sessions currently connected to the
Parani-MSP1000
Status
Solid GREEN, if system is running and ready to be used.
System
Power
Solid RED, if power is supplied
2.3. Connecting the Hardware
This section describes how to connect the Parani-MSP1000 to your equipment for initial testing.
- Connect the power source to the Parani-MSP1000
- Connect the Parani-MSP1000 to Ethernet switch
2.3.1. Connecting the power
Connect the power cable to the Parani-MSP1000. If the power is properly supplied, the [Power] lamp
will light up solid green.