User's Manual

1.1 External View

<Fig. 1.2> Parani-MSP100 external view

① DIP Switch

Users may select the way of data communication with host PC. Default setting is TCP/IP

communication using no. ④ RJ45 marked EXT, but if users need, data communication via

no. ③ RS232 Interface marked “IOIOI” is also possible.

* If DIP switch is on the side of drawing

, Parani-MSP communicates with Host via

Ethernet line (TCP/IP).

* If users want to use RS232 com. please change the direction of switch to the other way.

(effective after power-cycling)

② Power Port: For Power Adapter connection

③ RS232 Interface marked “IOIOI”:

For Parani-MSP network configuration via RS232 serial cable - One RS232 serial cable,

both ends female DSUB interfaces, is provided with Parani-MSP. This port can be used for

both Configuration of Parani-MSP and Data communication with Host.

EXT

INT