User's Manual

29
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
If you enable AT command interface in RS232 configuration console, AT commands
which are compatible with Parani-SD can be used with Parani-MSP. Please refer
Parani-MSP AT command list.
3.1.3 Bluetooth
In this page, users can find current status of Parani-MSP.
You can see the process of command at the bottom of each page as in red circle
above.
TIP:
For 14 connections in Parani-MSP100, please change the MaxDT to 14
above, after installing USB extension dongle provided.