User's Manual

z Users will be able to check the status of firmware upgrade in Serial console.

z During upgrade, LEDs will flash and users SHOULD NOT turn off Parani-MSP this time.

If user cannot send the ROM file, please check the network connection status.

z Once ROM file is delivered to the connected Parani-MSP, the upgrade firmware will be

recorded to nonvolatile memory. During this time both STATUS LED and ERROR LED

will flash speedily. NEVER turn off Parani-MSP during this firmware recording.

z Once finished, please resupply power to Parani-MSP for applying.

Note:

If you turn off Parani-MSP during firmware upgrade, Parani-MSP may be

damaged severely and irreversibly.