User's Manual

3. Firmware Download → 2.TFTP

z Then you will get following screen:

z Place the MSP upgrade ROM file which is downloaded from SENA web site to

C:\ folder on your PC and run tftp command on [Start] →[Run] as below.

z Users need to make sure that the upgrade ROM file is in the same location or users

need to specify the exact location to send the ROM file to the connected Parani-MSP

via crossed ethernet cable.

z Below window is showing the procedure of sending ROM file named

“msp2_040906.rom” to the connected Parani-MSP via TFTP.