User's Manual

12
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
(11) Please enter your Netmask/Gateway/DNS information, as in below for example:
(12) Press Enter; Parani-MSP™ will prompt reboot request. Enter ‘Y’ [Yes]; press
Enter to reboot Parani-MSP™ to apply the revised Network Settings.
(13) Enter Login ID and Password. Default ID: admin, Password: 11111
(14) Revised Network settings are displayed
<An example: Revised Network Settings>
(15) Networking configuration is complete. The preceding example shows static IP
assignment to Parani-MSP™. User selects static, DHCP or PPPoE IP as
needed.