User's Manual

Serial port settings can be changed by <Start Configuration> and <ParaniWIN Configuration> of

ParaniWIN in the menu bar at upper left corner of the window without re-running the ParaniWIN

program.

Figure 2-5 Menu Bar at Upper Left corner of ParaniWIN

The icons in the left side window come to the corresponding windows.

In device configuration window, hardware reset can be executed or operation mode and RS232 can

be configured as well. Security option also can be configured in this window.

Figure 2-6 Device Setting Window

Parani-ESD supports two security options, Authentication and Encryption. If you check the

Authentication option, you must also enter the Pin Code value. If the authentication is activated, the

connection, only between the Master and Slave device that share the same Pin Code, is established.

In case that Parani-ESD connects to other Bluetooth device that enables authentication, you must

know the other device’s Pin Code. In general Bluetooth devices, 1234 or 0000 is used as a default

value. If you check Encryption option, the Parani-ESD encrypts packets and sends them. The

Encryption options works well in case that only one between Master and Slave uses this option.