User's Manual

19
3-7.Select Device Setting icon in the list control box, and select MODE2 in Operation Mode and
apply.
<Fig. 3.1.9>
3-8. Now, detach P01 from your computer.
3-9. Make sure that power to Both P01 and P02 are supplied.
With both, P01 and P02, turn off both units using the Switch located on the side of its body.
Then, turn on both P01 and P02 almost at the same time.
Now, you will see Green Status LEDs on both units.
P01 and P02 will be connected automatically, as long as the configuration for both units remains
unchanged.