User's Manual

16
1-9. P01 now became ‘Discoverable/Connectable’ so it can receive Bluetooth connection from
P02. The STATUS LED of P01 will blink green, twice every 3 seconds.
1-10. Detach P01 from your computer, making sure its status LED is blinking green.
1-11. Close Parani10_Manager.
3.1.2 Let’s make P02 search and connect to P01.
2-1. Attach P02 to your PC, and start Parani10_Manager.
2-2. Select the number of the Serial port where P02.
2-3. Users need to select exactly same Baud/Parity/StopBit as the setting of attached P02.
9600/No/OneStopBit is default setting of all of Parani10s.
2-4. Press OK button.
2-5. Select the ‘Connection(out)’ icon in the list control box and click the SEARCH button.
<Fig. 3.1.5>
2-6. Search P01 from the searched list. Device Address of P01 can be found on the back side of
P01. If you find P01, press Cancel button to finish searching.
Make sure that Status LED of P01 is still blinking in Green.
2-7. Please select P01 from the searched list, then press CONNECT TO button.