User's Guide www.senabluetooth.
Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH5™, SPH10™, SPH10S™, SPH10H™, SR10™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and tradenames are those of their respective owners.
CONTENTS 1. INTRODUCTION 6 2. PACKAGE CONTENTS 9 3. INSTALLING THE SR10 11 3.1 Installing on the Handle Bar 11 3.2 Placing on the Belt/Pocket 11 4. POWERING ON/OFF AND CHARGING 12 4.1 Powering On 12 4.2 Powering Off 12 4.3 Charging 12 4.4 Bike-powered Charger Kit 13 4.5 Low Battery Warning 13 5. PAIRING THE SR10 WITH BLUETOOTH DEVICES 14 5.1 Bluetooth Headset Pairing 14 5.2 Bluetooth Mobile Phone Pairing 14 6. USING THE SR10 15 6.1 Using Two-way Radios 15 6.
English 6.6 Reset to Factory Default Settings 19 6.7 Fault Reset 19 6.8. Firmware Upgrade 19 7.
1. INTRODUCTION Thank you for choosing the Sena SR10. The SR10 is a Bluetooth two-way radio adapter and mobile phone handsfree gateway based on Bluetooth 2.1+EDR technology. Users can connect various two-way radios in the market with the SR10 and connect wirelessly to a variety of Bluetooth communication headsets. At the same time, as a Bluetooth mobile phone handsfree gateway, the SR10 lets users connect Bluetooth headsets to mobile phones as well.
English Please read this user’s guide carefully before using the SR10. Also refer to www.senabluetooth.com for the latest version of the user’s guide and additional information related to Sena Bluetooth products.
Technical Specifications: • Bluetooth 2.1+EDR • Supporting profiles: Headset Profile, Hands-Free Profile (HFP) • Operating time: 12 hours • Standby time: 10 days • Battery charging time: 3.5 hours • Lithium polymer battery • Dimensions: 108 mm × 52 mm × 29 mm (4.3 in × 2.0 in × 1.1 in) • Weight: 81g (2.
English 2. PACKAGE CONTENTS • Main Unit Pairing Button • Bluetooth Headset Pairing Mode • Mobile Phone Pairing Mode PTT Button • Transmit Radio • Open Audio Channel DC Power Charging & Firmware Upgrade Port AUX2 Port • Mobile Phone, GPS Navigation, Radar/Laser Detector Main Port • 6-pin Hirose Connector for Two-way Radio Devices AUX1 Port • GPS Navigation or Radar/Laser Detector 2.
• USB Power & Data Cable • 3.
English 3. INSTALLING THE SR10 3.1 Installing on the Handle Bar 1. Place the rubber on the back of the main unit. 2. Put the joint pad on top of the rubber, and tighten the screw. 3. Place the main unit on the handle bar, wind the rubber band, and hang it on the hook. 3.2 Placing on the Belt/Pocket 1. Place the belt-clip on the back of the main unit, and tighten the screw. 2. Place the main unit on the belt with belt-clip.
4. POWERING ON/OFF AND CHARGING To power on and off the adapter, you don’t need to press and hold any button for several seconds. Just short press the Pairing Button and the PTT Button simultaneously, and you will get quick on-andoff convenience. 4.1 Powering On Press and hold the Pairing Button and the PTT Button at the same time for about 1 second to turn the power on. When the power is on, the blue LED light turns on. 4.
charger type bike-powered kit. 4.5 Low Battery Warning When the battery is running low, the red LED light will flash. 13 English 4.
5. PAIRING THE SR10 WITH BLUETOOTH DEVICES 5.1 Bluetooth Headset Pairing 1. Turn on your Bluetooth headset and enter pairing mode, following the Bluetooth headset manual. 2. Turn on the SR10 and press and hold the Pairing Button for 5 seconds until the LED flashes red and blue alternatively. 3. When the pairing is successful, the blue LED flashes slowly. 5.2 Bluetooth Mobile Phone Pairing 1. Turn on the SR10 and press and hold the Pairing Button for 8 seconds until the red LED is rapidly flashing.
English 6. USING THE SR10 6.1 Using Two-way Radios 1. When SR10 is turned on and connected with a hand held twoway radio, the audio from the two-way radio will be directly sent to your Bluetooth headset. You can use the Bluetooth headset as a handsfree device for the two-way radio. 2. To talk using the two-way radio through SR10, press and hold the PTT Button until you finish talking. 6.2 Installing Wired PTT Button 1.
6.3 Ports and Cables The SR10 has one Main Port and two AUX ports for wired connection with other devices. Below is a list of compatible cables and devices: • Main: 6-pin Hirose connector type two-way radio cable * • AUX1: 3.5mm 3-pole audio jack cable for GPS, radar detectors or laser detectors ** • AUX2: 3.5mm 3-pole audio jack cable for GPS, radar detectors or laser detectors, or 3.
6.4.1 For Bluetooth Wireless Connection When the SR10 is paired with a Bluetooth headset and a Bluetooth mobile phone, the Bluetooth headset will provide Hands-Free Profile for your mobile phone. The SR10 redirects mobile phone calls and two-way radio communications to the Bluetooth headset simultaneously so that a Bluetooth headset could be used for both the mobile phone and hand held two-way radio. 6.4.
detector alarm or mobile phone ringtone. If there is no incoming sound from the wired devices for a certain period of time, the SR10 disconnects itself from the Bluetooth headset. Even if there is no incoming sound from the wired devices, users can also connect the SR10 manually to the Bluetooth headset by double tapping the PTT Button. Users can also double tap the PTT Button while the SR10 is already connected to the Bluetooth headset to prevent it from disconnecting itself automatically.
6.7 Fault Reset If the SR10 is not working properly or is in a faulty status for any reason, you may reset by pushing the small reset button at the top of the SR10 main unit. By using a paper clip or a pencil tip, lightly press and hold the reset button for 1 second. The SR10 will be switched off. Turn the SR10 back on to use it. However, this will not restore the SR10 to factory default settings. 6.8 Firmware Upgrade The SR10 supports firmware upgrade function. Please visit Sena Bluetooth web site at www.
7.
English BATTERY INFORMATION The SR10 has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard.
MAINTENANCE AND CARE The SR10 should be treated with care and the following suggestions will help you protect your warranty coverage. 1. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. 2. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and wrap or melt certain plastics. 3. Do not store the device in cold areas.
English DISPOSAL The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
CERTIFICATION AND SAFETY APPROVALS • FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: - This device may not cause harmful interference, and - This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
• FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
information please consult http://www.senabluetooth.com. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. • Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s).
English WAIVER AND GENERAL RELEASE By using the SR10, you waive any legal rights including the right to sue. Please read the following carefully before using the device. If you do not accept all terms of this agreement, you should immediately return the product for a full refund. By using the SR10, you agree to be bound to this agreement and forfeit the right to sue.
By way of purchasing this Device and not returning it for a full refund (see below), you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorneys fees) and holding Sena harmless for any bodily injuries, harm or death as well as losses or damages in goods, to any Vehicles including your own, or to any property or asset that belong to you or to third parties, any of which may result from using the Device under any circumstances or conditions and irrespective of
29 English discomfort, loss, injury, death, damages to or in respect to any person or property however caused, WHETHER ARISING FROM THE NEGLIGENCE OR OTHERWISE, and which may hereafter accrue to you on some future date as a result of said use, to the fullest extent permitted by law. 2. You fully understand and assume the risks in using the Device, including risk of negligent acts or omissions by others. 3.
foreseeable or unforeseeable causes. You hereby assume all risks and dangers and all responsibility for any losses and/or damages, whether caused in whole or in part by the negligence or other conduct of others, including the Company. 5. You confirm that you have read this release of liability and fully understand its terms and that you have given up substantial rights by not returning the Device for a full refund (see refund option below). • Two-Year Limited Warranty Sena Technologies, Inc.
• Limitation of Liability EXCEPT AS EXPRESSLY PROVIDED HEREIN, Sena MAKES NO WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED, WITH RESPECT TO ANY EQUIPMENT, PARTS OR SERVICES PROVIDED PURSUANT TO THIS AGREEMENT, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
OR ARISING OUT OF, OR IN CONNECTION WITH THE USE OF FURNISHING OF EQUIPMENT, PARTS OR SERVICES HEREUNDER OR THE PERFORMANCE, USE OR INABILITY TO USE THE SAME, EVEN IF Sena OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL Sena OR ITS DEALERS TOTAL LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT.
English WARNING Sena informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. Sena denies any liability should you choose not to respect this warning.
1.1.2 User's Guide for Firmware v1.2 www.senabluetooth.
