www.senabluetooth.
SPH10H Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license.
SPH10H CONTENTS 1. 2. 3. 4. INTRODUCTION..................................................................................5 PACKAGE CONTENTS.......................................................................6 INSTALLING THE SPH10H ON YOUR HELMET...............................7 POWERING ON/OFF AND CHARGING..............................................8 4.1 Powering On...............................................................................8 4.2 Powering Off........................................
SPH10H Thank you for choosing the Sena SPH10H, Bluetooth Stereo Headset and Intercom for Half Helmets. With the SPH10H, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SPH10H is compliant with the Bluetooth 3.
SPH10H 2.
SPH10H 3. INSTALLING THE SPH10H ON YOUR HELMET English • USB Power and Data Cable • Cigarette Charger • Stereo Audio Cable • Tab Insertion Tool 1. Insert the two plastic tabs of the SPH10H on the headset ear pads into the left and right side of your helmet. You may use the Tab Insertion Tool located in the package to help insert the plastic tabs into your helmet. Place the Tab Insertion Tool against the tab side with velcro. Insert the tab and insertion tool at the same time into the helmet.
SPH10H 2. Please make sure that one of the headset ear pads with the microphone is located on the left side of your helmet. 4. POWERING ON/OFF AND CHARGING To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-off convenience. 3. Tuck in the cable that connects left and right ear pads, between the helmet shell and protective padding or inside the helmet. 4.
SPH10H 4.4 Low Battery Warning 4.5 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on. 4.5.1 LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30% 5.
SPH10H 6. PAIRING THE SPH10 WITH BLUETOOTH DEVICES Before using the SPH10H Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, or motorcycle specific Bluetooth GPS, and with other Sena Bluetooth headsets. This pairing operation is only required once for each Bluetooth device.
SPH10H 6.3 Bluetooth Stereo Device Pairing 1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the SPH10H with it separately. When the SPH10H is paired with the mobile phone, it is also paired as a stereo music device. 2. If you have a stand alone Bluetooth stereo device, follow the paring procedure separately. The procedure is the same as the procedure in “6.1 Mobile Phone Pairing”. Note: 1.
SPH10H 6.4.1 Multipoint GPS Pairing If you use GPS only for turn-by-turn voice instructions, not for Bluetooth stereo music streaming, multipoint pairing is recommended for the GPS connection. Multipoint Bluetooth pairing allows the SPH10H to connect two HFP devices at the same time: mobile phone and GPS navigation. Follow the steps below to pair the GPS using the multipoint pairing. 1.
SPH10H HFP GPS Mobile Phone HFP Mobile Phone + Pairing (A2DP) SPH10H GPS Pairing as Mobile Phone Note: You have to use a motorcycle specific GPS which transmits turn-by-turn voice instruction to the headset by Bluetooth. Most automotive GPS systems don’t have this feature. 6.5 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specific GPS navigation systems.
SPH10H The incoming audio from the two-way radio via SR10 is heard in the background while having an intercom conversation or a mobile phone call. You can listen to music, answer a mobile call, have an intercom conversation and use a two-way radio via SR10 for group communication as shown in the figure below. A GPS navigation or a radar detector could be connected to the SR10 by wire.
SPH10H If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SPH10H for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the SPH10H to their smartphones only with one selective profile: A2DP stereo for music or HFP for phone call. If you have previously paired a mobile phone to the SPH10H, you must clear the previous paring list on both devices; the mobile phone and SPH10H.
SPH10H A 8. INTERCOM PAIRING B 8.1 Pairing with Other SPH10H Headsets for Intercom Conversation The SPH10H can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two SPH10H headsets (A and B) that you would like to pair with each other. 2. Press and hold the Jog Dial of the headset A and B for 5 seconds until red LEDs of the both units start to flash rapidly. You will hear a voice prompt saying “Intercom pairing”. 3.
SPH10H Note: For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A. 8.2 Pairing with Other Sena Headset Models for Intercom Conversation The SPH10H can be paired with all other Sena headset models such as the SMH5 and the SPH10H for intercom conversation. Please follow the same procedure as above to pair with these headset models.
SPH10H The voice prompt for each menu item is as below: (1) VOX phone (4) Delete all pairings (2) VOX intercom (5) Exit configuration 9.2 Enabling/Disabling Voice Activated Intercom (3) Voice prompt VOX phone Exit configuration Delete all pairings Voice Prompt VOX intercom Voice prompt 9.
SPH10H 9.3 Enabling/Disabling Voice Prompts 9.4 Delete all Bluetooth Pairing Information Voice Prompt “Delete all pairings” Factory Default N/A Execute Tap the Phone Button To delete all Bluetooth pairing information of the SPH10H, rotate the Jog Dial until you hear a voice prompt, “Delete all pairings”, and tap the Phone Button to confirm. Taping the Jog Dial is not available for this setting.
SPH10H Rotate Jog Dial Tap Phone Button Tap Jog Dial VOX Phone Enable Disable VOX Intercom Enable Disable Voice Prompt Enable Disable Delete All Pairings Execute N/A Exit Configuration Execute N/A Voice Configuration Menu & Button Operations 20 10.
SPH10H You can listen to stereo music in two ways: with the enclosed stereo audio cable or by Bluetooth wireless stereo. 11.1 By Stereo Audio Cable Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SPH10H to remotely control music playback. You not only can adjust the volume but also use the functions such as play, pause, next track and previous track. 1. To adjust the volume, rotate the Jog Dial.
SPH10H 3. To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise. Note: Bluetooth music is available only when the MP3 jack port remains open. Please make sure the audio cable is unplugged from the clamp unit to play music by Bluetooth. 22 12. MOBILE PHONE CALL MAKING AND ANSWERING 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call. 2.
SPH10H Answer End Tap Phone Button or Tap Jog Dial or Say “Hello” Reject Press Jog Dial for 2” Press Phone Button for 2” Call Voice Command 1. I f you are using multipoint mobile phone connection and you have an incoming call from the second phone during the call of the first phone, then you may still receive the call from second phone. In this case, the call from the first phone is on waiting mode. If you end a call, then it will automatically guide you to the first phone call. 2.
SPH10H tapping. A double or triple tapping will do nothing in this case. 13. TWO-WAY INTERCOM 13.1 Start and End Two-way Intercom 1. You can start an intercom conversation with one of any intercom friends by tapping the Jog Dial: single tapping to intercom with the first intercom friend, double tapping with the second intercom friend, and triple tapping with the third intercom friend.
SPH10H 13.3 Intercom and GPS If you pair a Bluetooth GPS to the SPH10H as described in 6.3 of this user's guide, you can hear the turn-by-turn voice instruction of the GPS while having an intercom conversation. The GPS voice instruction interrupts intercom conversation, but it is automatically reestablished after the GPS voice instruction ends. English b. To reject the phone call and stay on the intercom conversation, press the Jog Dial for 2 seconds until you hear a beep.
SPH10H 14. THREE-WAY CONFERENCE INTERCOM Smart Phone HFP + Mobile Phone Pairing A2DP Wired Connection Audio from Two-way Radio SPH10H Intercom 14.1 Start Three-way Intercom Two-way radio Multipoint Pairing Intercom Pairing Wired Connection Sena SR10 Wired Connection Radar Detector Intercom Friend Intercom and Two-way Radio 26 GPS You (A) can have a three-way conference intercom with two other SPH10H friends (B & C) by establishing two intercom connections at the same time.
SPH10H Pa i rin g Second Friend (C) 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). (A) First Friend (B) (A) g First Friend (B) n iri Pa (A) 3. The second intercom friend (C) may join the intercom by making an intercom call to you (A). First Friend (B) Second Friend (C) 4.
SPH10H 14.2 End Three-way Intercom When you are a member of an active three-way conference intercom, you can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1. Press the Jog Dial for 1 second until you hear a beep to terminate three-way conference intercom completely. It terminates both intercom connections with (B) and (C). 2.
SPH10H 15.2 End Four-way Intercom Jog Dial Operation Press for 1” Result 16. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT English As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just disconnect a single intercom connection. 1. Press the Jog Dial for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the intercom connections between you (A), and your intercom friends (B), (C) and (D). 2.
SPH10H Start End intercom first End phone call first Tap Jog Dial while having a mobile phone call Tap Jog Dial Press Jog Dial for 2” or Tap Phone Button or Wait for the called person to end the call 17. INTERCOM FAILURE When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal. In this case, you have to try again later.
SPH10H 1. To restore the SPH10H to factory default settings, press and hold the Phone Button for 12 seconds until the LED shows solid red and you hear double beeps. You will hear a voice prompt saying “Factory reset”. 2. Within 5 seconds, press the Jog Dial to confirm reset. The headset will be restored to factory setting and switched off automatically. You will hear a voice prompt saying “Headset reset, good-bye”. 3.
SPH10H 3. Take out the module from the front of the ear flap to see the reset pin-hole on the opposite side of the module. 21. FIRMWARE UPGRADE The SPH10H supports firmware upgrade function. Please visit Sena Bluetooth web site at www. senabluetooth.com to check the latest software downloads. Detach 4. Insert a paper clip into the reset pin-hole and press the reset button for 1 second with light pressure, at which time the SPH10H will be switched off. Turn the SPH10H back on.
SPH10H Case 2 Case 1 • iPhone for mobile phone call and stereo music streaming • ZumoTM 550 or ZumoTM 220 for GPS voice instruction • SPH10H for two-way intercom • iPhone for mobile phone call and stereo music streaming • ZumoTM 660/665 for GPS voice instruction • SPH10H for two-way intercom iPhone Mobile Call Pairing: 6.1 Music iPhone Mobile Call Pairing: 6.1 Music Intercom Conversation SPH10H Intercom Conversation SPH10H Pairing: 8.1 GPS Voice SPH10H Pairing: 6.3.1 Pairing: 8.
SPH10H Case 3 • iPhone for mobile phone call via ZumoTM 660/665 • ZumoTM 660/665 for GPS voice instruction and stereo music streaming • SPH10H for two-way intercom Case 4 • Feature phone for mobile phone call • iPod Touch for stereo music streaming • Two other SPH10Hs for three-way conference intercom Feature Phone ZumoTM 660/665 Mobile Pairing: 6.1 Call Mobile Call Music GPS Voice Intercom Conversation SPH10H Multipoint Mobile Call SPH10H Intercom Conversation SPH10H Pairing: 8.
SPH10H Case 5 Case 6 iPhone for mobile phone call iPod Touch for stereo music streaming TomTom® Rider2 for GPS voice instruction SPH10H for two-way intercom • iPhone for mobile phone call and stereo music streaming • Sena SR10 for two-way radio, GPS voice instruction, and radar detector alarm • SPH10H for two-way intercom iPhone Mobile Call iPhone Pairing: 7.2 Mobile Call Music Intercom Conversation SPH10H Pairing: 8.1 Music SPH10H GPS Voice Pairing: 6.2 Pairing: 6.3.
SPH10H BATTERY INFORMATION MAINTENANCE AND CARE The product has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard.
SPH10H The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
SPH10H the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
SPH10H Bluetooth License The SPH10H is compliant with and adopts the Bluetooth® Specification 3.0 and has successfully passed all interoperability tests that are specified in the Bluetooth® specification. However, interoperability between the device and other Bluetooth®-enabled products is not guaranteed. WAIVER AND GENERAL RELEASE By using the product you waive all substantial legal rights including the right to sue. Please read the following carefully before using the device.
SPH10H Device while riding a Vehicle are solely intended to address its technical capabilities and should not be misconstrued as if encouraging users to operate the Device while actively involved in traffic.
SPH10H Two-Year Limited Warranty Sena Technologies, Inc. (“Sena”) warrants that this product (“Product”) shall conform to and perform in accordance with published technical specifications and the accompanying written materials, and shall be free of defects in materials and workmanship, for a period of two (2) year from the date of purchase by the first consumer purchaser of the Product.
SPH10H distributor it was purchased through and providing proof of purchase or receipt date. Customer agrees to insure the Product or assume the risk of loss or damage in transit, to prepay shipping charges to Sena, and to use the original shipping container or equivalent. SERVICES HEREUNDER OR THE PERFORMANCE, USE OR INABILITY TO USE THE SAME, EVEN IF SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SPH10H English WARNING Sena informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. If the simultaneous use of both ear speakers while riding a motorcycle is prohibited by your local law, please use only a single ear speaker while riding. Sena denies any liability should you choose not to respect this warning.
1.1.0 www.senabluetooth.com User's Guide for Firmware v4.
