Bluetooth® Stereo Headset & Intercom with Built-in FM Tuner for Half Helmets www.SenaBluetooth.
SPH10H-FM Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5- FM™, SPH10™, SPH10H™, SPH10S™, SR10™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena . The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod touch are registered trademarks of Apple Inc.
SPH10H-FM CONTENTS 1. 2. 3. 4. INTRODUCTION..................................................................................................3 PACKAGE CONTENTS.......................................................................................4 INSTALLING THE SPH10H-FM ON YOUR HELMET........................................5 POWERING ON/OFF AND CHARGING....................................................................7 4.1 4.2 4.3 4.4 4.5 Powering On...................................................
SPH10H-FM Thank you for choosing the Sena SPH10H-FM, Bluetooth Stereo Headset & Intercom with Built-in FM Tuner for Half Helmets. With the SPH10H-FM, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SPH10H-FM is compliant with the Bluetooth 3.
SPH10H-FM 2.
SPH10H-FM • Cigarette Charger • Microphone Sponges • Tab Insertion Tool 3. INSTALLING THE SPH10H-FM ON YOUR HELMET English • USB Power and Data Cable Before installing the SPH10H-FM, remove the main unit from the earpad. 1. Pull the connector cover upward to unlock the connector and pull out the speaker cable. 2. Slide upward the main unit to remove from the earpad.
SPH10H-FM 3. Insert the two plastic tabs of the SPH10H-FM on the headset earpads into the left and right side of your helmet. You may use the tab insertion tool located in the package to help insert the plastic tabs into your helmet. Place the tab insertion tool against the tab side with velcro. Insert the tab and tab insertion tool at the same time into the helmet. When the tab is in the proper position, slide the tab insertion tool out. The velcro will now hold the tab securely in place. 5.
SPH10H-FM 4. POWERING ON/OFF AND CHARGING English 8. Tuck in the cable that connects left and right earpads, between the helmet shell and protective padding or inside the helmet. To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-off convenience. 4.1 Powering On Press the Jog Dial and the Phone Button at the same time for about 1 second to power on.
SPH10H-FM 4.3 Charging 4.5 Checking the Battery Level • To charge the SPH10H-FM, use the USB power and data cable included in the package by plugging into computer’s USB port or USB wall charger. USB wall charger is not included in the package, but you can use any USB wall charger in the market. • The USB power and data cable is also used for firmware upgrade of the SPH10H-FM.
SPH10H-FM You can easily adjust the volume by rotating the Jog Dial. You will hear a beep when the volume reaches maximum or minimum level. The volume is set and maintained independently at different levels for each audio source even when you turn off and on the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume when you hear Bluetooth MP3 music. So you can always maintain the preferred optimum volume level for each audio source. 6.
SPH10H-FM 3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 4. The mobile phone confirms that pairing has completed and the SPH10H-FM is ready to use. You will hear a voice prompt from the SPH10H-FM saying “Your headset is paired”. 5. If the pairing process is not completed within three minutes, the SPH10H-FM will return to stand-by mode. 6.
SPH10H-FM 1. I f Bluetooth connection between the headset and a mobile phone is disconnected, tap the Phone Button to recover the Bluetooth connection immediately. 2. If Bluetooth connection between the headset and a media player is disconnected, press the Jog Dial for 1 second to recover the Bluetooth connection and play. 6.4 Bluetooth GPS Navigation Pairing You can listen to voice instruction from Bluetooth GPS navigation.
SPH10H-FM The pairing diagram for multipoint GPS pairing is shown in the figure below. GPS HFP Mobile Phone + Pairing (A2DP) Smart Phone HFP + Mobile Phone Pairing A2DP HFP SPH10H-FM HFP SPH10H-FM Multipoint Pairing Mobile Phone GPS Pairing as Mobile Phone GPS Multipoint GPS Pairing 6.4.
SPH10H-FM The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specific GPS navigation systems. If you pair the SPH10H-FM with a SR10 by multipoint pairing, the SPH10H-FM is able to have two HFP devices at the same time: mobile phone and Sena SR10. 1. Turn on the headset and press the Jog Dial for 5 seconds until the red LED is rapidly flashing and you hear multiple beeps. 2.
SPH10H-FM 7. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE Smart Phone Two-way Radio HFP Mobile Phone + Pairing A2DP HFP SPH10H-FM Multipoint Pairing Wired Connection Sena SR10 Wired Connection GPS Wired Connection Radar Detector Parallel Connection of SR10 and Mobile Phone by Bluetooth Multipoint Pairing If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SPH10H-FM for A2DP stereo music only or for mobile phone handsfree only.
SPH10H-FM 7.2 HFP for Phone Call Only 1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps. 2. Within 2 seconds, tap the Phone Button again, then the LED turns to blue flashing and the beeps turn to multiple mid-tone beeps. You will hear a voice prompt saying “Phone selective pairing”. 3. Search for Bluetooth devices on your smartphone. Select the Sena SPH10H-FM in the list of devices detected on your phone. 4.
SPH10H-FM 5. The intercom pairing queue is ‘Last-Come, FirstServed’. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second intercom friend, and third intercom friend. A B D C Note: Pairing A & B 4. Y ou can make other pairings between the headset A and C, and between the headset A and D by following the same procedure as above.
SPH10H-FM You can set the configuration of the SPH10H-FM by the voice menu instruction as below. 1. To enter into voice configuration menu, press and hold the Jog Dial for 12 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying “Configuration menu”. 2. Rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus. You will hear voice prompts for each menu items as below. 3.
SPH10H-FM 2. Tap the Phone Button, and you will hear a voice prompt saying “Speed dial one” and “Phone connected”. 3. Rotate the Jog Dial to select one of three speed dial numbers and you hear a voice prompt saying “Speed dial (#)”. 4. Call a phone number you want to assign and you will hear a voice prompt saying “Save speed dial (#)”. The phone number is automatically assigned to the selected speed dial number. Then the phone call will hang up before being connected. 5.
SPH10H-FM 9.4 Enabling/Disabling Voice Prompts Voice Prompt English If this feature is enabled, you can initiate an intercom conversation with the last connected intercom friend by speaking any word loudly enough.The most effortless way to trigger intercom VOX is to blow into the microphone as if blowing dust off the microphone. If you start an intercom conversation by VOX, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds.
SPH10H-FM 9.7 Exit Voice Configuration Menu Note: RDS feature may be available when radio channel station provides equivalent service. 9.6 Delete All Bluetooth Pairing Information Voice Prompt “Delete all pairings” Factory Default N/A Execute Tap the Phone Button To delete all Bluetooth pairing information of the SPH10H, rotate the Jog Dial until you hear a voice prompt, “Delete all pairings”, and tap the Phone Button to confirm. Taping the Jog Dial is not available for this setting.
SPH10H-FM The SPH10H-FM operates in the following order of priority: (highest) Mobile phone, Intercom, Music sharing by Bluetooth stereo music FM Radio, (lowest) Bluetooth stereo music A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by intercom call, and intercom conversation is interrupted by incoming mobile phone call. 11. STEREO MUSIC English 10.
SPH10H-FM 2. To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep. 12. MOBILE PHONE CALL MAKING AND ANSWERING 12.1 Mobile Phone Call Making and Answering 3. To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise. 22 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call. 2.
SPH10H-FM Note: 1. If you are using multipoint mobile phone connection and you have an incoming call from the second phone during the call of the first phone, then you may still receive the call from second phone. In this case, the call from the first phone is on waiting mode. If you end a call, then it will automatically guide you to the first phone call. 2. If you are using multipoint connection of mobile phone and GPS, you may not listen to the GPS voice instruction during the phone call. 12.
SPH10H-FM 6. If you want to exit the speed dial immediately, rotate the Jog Dial until you hear a voice prompt saying “Cancel”, and tap the Phone Button or the Jog Dial. If any button is not pressed within 15 seconds, the SPH10H-FM will exit the voice speed dial menu and goes back to stand-by mode. Note: Make sure that you should connect the mobile phone and the headset in order to use the speed dial function. Answer End Reject Press Jog Dial for 2” Transfer Press Phone Button for 2” 1.
SPH10H-FM Terminate End Two-way Intercom Conversation Start intercom End intercom 1st intercom friend 2nd intercom friend 3rd intercom friend Single tap Double tap Triple tap Single tap Start & End Two-way Intercom 13.2 Intercom and Mobile Phone Call 1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone.
SPH10H-FM 13.3 Intercom and GPS 13.4 Intercom and Two-way Radio If you pair a Bluetooth GPS to the SPH10H-FM as described in 6.4 of this user's guide, you can hear the turn-by-turn voice instruction of the GPS while having an intercom conversation. The GPS voice instruction interrupts intercom conversation, but it is automatically reestablished after the GPS voice instruction ends. As described in 6.
SPH10H-FM English 14. THREE-WAY CONFERENCE INTERCOM 14.1 Start Three-way Intercom Smart Phone Two-way Radio HFP Mobile Phone + Pairing A2DP Wired Connection Audio from Two-way Radio Sena SR10 Multipoint Pairing SPH10H-FM Intercom Wired Connection Wired Connection Intercom Pairing Radar Detector GPS You (A) can have a three-way conference intercom with two other SPH10H-FM friends (B & C) by establishing two intercom connections at the same time.
SPH10H-FM 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). 4. Now you (A) and two SPH10H-FM intercom friends (B & C) are having a three-way conference intercom. (A) (A) First Friend (B) First Friend (B) Second Friend (C) 3. The second intercom friend (C) may join the intercom by making an intercom call to you (A).
SPH10H-FM Jog Dial Operation Press for 1” Result Disconnect (B) & (C) Single tap Disconnect (B) Double tap Disconnect (C) End Three-way Intercom 15. FOUR-WAY CONFERENCE INTERCOM English 2. Tap or double tap the Jog Dial to disconnect intercom connection with one of the two intercom friends accordingly. For example, by single tapping the Jog Dial, you can just terminate the intercom connection with the first intercom friend (B).
SPH10H-FM 15.2 End Four-way Intercom As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just disconnect a single intercom connection. 1. Press the Jog Dial for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the intercom connections between you (A), and your intercom friends (B) and (C). 2. Tap or double tap the Jog Dial to disconnect the intercom connection with one of the two intercom friends accordingly.
SPH10H-FM You can have a three-way conference phone call by adding an intercom friend to the mobile phone conversation. While having a mobile phone call, make an intercom call to one of the intercom friends by tapping the Jog Dial to form a three-way conference call with the person on the mobile phone line. To disconnect the intercom first and go back to your private mobile phone call, terminate the intercom by tapping the Jog Dial.
SPH10H-FM 20. FM RADIO You can answer the incoming call and intercom while still listening to the FM radio. 20.1 FM Radio On / Off To turn on the FM radio, press and hold the Phone Button for 2 seconds until you hear a mid-tone double beep sound. You will then hear a voice prompt saying “FM on”. In order to turn off the FM radio, press and hold the Phone Button for 2 seconds until you hear a voice prompt saying “FM off”. When you power off, the SPH10H-FM will remember the last station frequency.
SPH10H-FM You can save FM stations to presets before using FM radio. Connect SPH10H-FM to your PC and open the Sena Device Manager. It allows you to save FM station frequencies up to 10 presets on the SPH10H-FM setting menu. 20.4 Scan and Save “Scan” is the function that searches from the current station frequency upward for stations in a whole range of FM frequencies. To use the scan function, please follow the procedures below: 1. Double tap the Phone Button.
SPH10H-FM 20.6 Region Selection You can select proper FM frequency region from Sena device manager. With the region setting, you may optimize seek function to avoid unnecessary frequency range (Factory default: worldwide). 34 Region Frequency Range Step Worldwide 76.0 ~ 108.0 MHz ± 100 kHz Americas 87.5 ~ 107.9 MHz ± 200 kHz Asia 87.5 ~ 108.0 MHz ± 100 kHz Australia 87.5 ~ 107.9 MHz ± 200 kHz Europe 87.5 ~ 108.0 MHz ± 100 kHz Japan 76.0 ~ 90.0 MHz ± 100 kHz 21.
SPH10H-FM When the SPH10H-FM is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. The SPH10H-FM will be switched off after which time, you have to turn the system back on and try again. However, this will not restore the headset to factory default settings. 23. FIRMWARE UPGRADE English 22.
SPH10H-FM 24. SENA BLUETOOTH CONNECTION CASE STUDIES Case 1 Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Multipoint Pairing 3.
SPH10H-FM Case 2 Bluetooth GPS* Mobile Phone Pairing Intercom Pairing Mobile Phone Bluetooth Pairing Procedure 1. GPS - Mobile Phone Pairing 2. Mobile Phone Pairing 3.
SPH10H-FM Case 3 Bluetooth GPS* Mobile Phone Pairing Intercom Pairing 38 Multipoint Pairing Mobile Phone Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Multipoint Pairing 3.
SPH10H-FM Case 4 Mobile Phone Mobile Phone Pairing Intercom Pairing Mobile Phone Pairing English Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Mobile Phone Pairing 3.
SPH10H-FM Case 5 Mobile Phone Mobile Phone Pairing GPS Intercom Pairing Mobile Phone Pairing Motorcycle Bluetooth Audio System* Music 40 Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Mobile Phone Pairing 3.
SPH10H-FM Case 6 English Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Mobile Phone Pairing 3. Multipoint Pairing 4.
SPH10H-FM Case 7 Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Multipoint Pairing 3.
SPH10H-FM Case 8 Mobile Phone Pairing Mobile Phone English MP3 Player Bluetooth Pairing Procedure 1. GPS - Mobile Phone Pairing 2. Mobile Phone Pairing 3. Mobile Phone Pairing 4.
SPH10H-FM Case 9 Mobile Phone GPS Mobile Phone Pairing Multipoint Pairing Mobile Phone Pairing Two-way Radio Intercom Pairing Mobile Phone Pairing Radar Detector 44 Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Mobile Phone Pairing 3. Mobile Phone Pairing 4. Multipoint Pairing 5.
SPH10H-FM Case 10 English Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Mobile Phone Pairing 3. Mobile Phone Pairing 4. Multipoint Pairing 5.
SPH10H-FM 25.
SPH10H-FM MAINTENANCE AND CARE The product has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard.
SPH10H-FM DISPOSAL CERTIFICATION AND SAFETY APPROVALS The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
SPH10H-FM FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
SPH10H-FM Bluetooth License The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners. The product is compliant with and adopts the Bluetooth® Specification 3.0 and has successfully passed all interoperability tests that are specified in the Bluetooth® specification. However, interoperability between the device and other Bluetooth®-enabled products is not guaranteed.
SPH10H-FM By way of purchasing this Device and not returning it for a full refund (see below), you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorney’s fees) and holding Sena harmless for any bodily injuries, harm or death as well as losses or damages in goods, to any Vehicles including your own, or to any property or asset that belong to you or to third parties, any of which may result from using the Device under any circumstances or conditions and irre
SPH10H-FM with the use of the Device. You further confirm that you will not consume any alcohol that may affect your alertness or any mind-altering substance, and will not carry, use or consume these substances before or during the use of the Device. 4.
SPH10H-FM USE OR INABILITY TO USE THE SAME, EVEN IF SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL SENA OR ITS DEALERS TOTAL LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT.
SPH10H-FM WARNING Sena informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. If the simultaneous use of both ear speakers while riding a motorcycle is prohibited by your local law, please use only a single ear speaker while riding. Sena denies any liability should you choose not to respect this warning.
1.1.0 www.SenaBluetooth.com User's Guide for Firmware v4.
