SMH5 Bluetooth® Headset & Intercom for Scooters & Motorcycles www.SenaBluetooth.
SMH5 Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5FM™, SMH3™, SPH10™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SR10i™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license.
SMH5 CONTENTS 1. INTRODUCTION......................................................................................................5 2. PACKAGE CONTENTS...........................................................................................6 3. INSTALLING THE SMH5 ON YOUR HELMET........................................................7 4. POWERING ON/OFF AND CHARGING................................................................10 4.1 Powering On..........................................................
SMH5 Thank you for choosing the Sena SMH5, Bluetooth Stereo Headset and Intercom for scooters and motorcycles. With the SMH5, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigation by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other riders. The SMH5 is compliant with the Bluetooth Specification 3.
SMH5 2.
SMH5 • Wired Microphone • Velcro Pads for Wired Microphone • USB Power & Data Cable 3. INSTALLING THE SMH5 ON YOUR HELMET English - Full-face Helmet Kit 1. Loosen the two screws on the back plate of the clamp using the enclosed Allen Wrench. Insert the back plate of the clamp unit between the internal padding and external shell of the helmet, and tighten the two screws.
SMH5 2. Attach the headset main unit to the clamp. Insert the main unit in the clamp until you feel the click that signals a secure attachment. 3. If you have any problem mounting the clamp unit on the helmet for any reason, you may use the glued surface mounting plate which can be attached to the external surface of the helmet. • Locate a proper surface on the helmet to attach the unit, clean the helmet surface location with a moistened towel, and allow to dry thoroughly.
SMH5 fin In the case of the wired microphone included in the “Full-face Helmet Kit”, attach the enclosed velcro pad for wired microphone to the inside of the chin guard for full-face helmets. Place the wired microphone on the velcro pad and attach it to the connector of the speaker cable. 7. To remove the headset main unit from the clamp, please make sure to pull out the speaker cable connector from the main unit first. Then, remove the main unit from the clamp. 9 English 6.
SMH5 Note: Be sure to connect the speaker cable securely to the main unit. It is strongly recommended that you insert the cable tightly into the connector housing while holding the main unit. 4. POWERING ON/OFF AND CHARGING To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-off convenience. 4.
SMH5 4.4 Low Battery Warning When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear mid-tone triple beeps and a voice prompt saying “Low battery”. 5. CHECKING THE BATTERY LEVEL English 4.3 Charging • To charge the SMH5, use the USB Power & Data Cable included in the package by plugging into computer’s USB port or USB wall charger. USB wall charger is not included in the package, but you can use any USB wall charger in the market.
SMH5 6. PAIRING THE SMH5 WITH BLUETOOTH DEVICES Before using the SMH5 Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, or motorcycle specific Bluetooth GPS, and with other Sena Bluetooth headsets.
SMH5 6.2 Bluetooth Stereo Device Pairing 1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the SMH5 with it separately. When the SMH5 is paired with the mobile phone, it is also paired as a stereo music device. 2. If you have a stand alone Bluetooth stereo device, follow the pairing procedure separately. The procedure is the same as the procedure of “6.1 Mobile phone pairing”. Note: 1.
SMH5 5. The GPS confirms that pairing has completed and the SMH5 is ready to use. You will hear a voice prompt from the SMH5 saying “Your headset is paired”. 6. If the pairing process is not completed within three minutes, the SMH5 will return to stand-by mode. The pairing diagram for multipoint GPS pairing is shown in the figure below. 6.3.
SMH5 If you have previously paired a mobile phone to the SMH5, you must clear the previous paring list on both devices; the mobile phone and SMH5. To clear the pairing list on SMH5, please do a factory reset described on the page 19.To clear the pairing list on the mobile phone, please refer to the mobile phone manual. For most smartphones, delete the Sena SMH5 from the list of Bluetooth devices in setting menu. 7.2 HFP for Phone Call Only 1.
SMH5 A 8. PAIRING WITH OTHER SMH5 HEADSETS FOR INTERCOM CONVERSATION The SMH5 can be paired with up to three other headsets for Bluetooth Intercom conversation. 1. Turn on the two SMH5 headsets (A and B) that you would like to pair with each other. 2. Press and hold the Jog Dial of the headset A and B for 5 seconds until red LEDs of the both units start to flash rapidly. You will hear a voice prompt saying “Intercom pairing”. 3.
SMH5 Note: For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A. 9. PAIRING WITH OTHER SENA HEADSET MODELS FOR INTERCOM CONVERSATION The SMH5 can be paired with all other Sena headset models such as the SMH10 and the SPH10 for intercom conversation. Please follow the same procedure as above to pair with these headset models. 10.
SMH5 The voice prompt for each menu item is as below: (1) Speed dial (4) Delete all pairings (2) VOX phone (5) Exit configuration (3) Voice prompt Speed dial Exit configuration VOX phone Delete all pairings Voice prompt 10.1 Assigning Speed Dial Voice Prompt “Speed dial” Factory Default N/A Execute Tap the Phone Button 1. To assign a phone number as a speed dial, rotate the Jog Dial until you hear a voice prompt saying “Speed dial”. 2.
SMH5 10.2 Enabling/Disabling Voice Activated Phone Answering “VOX phone” - Voice prompts for battery level Indicator - Voice prompts for factory reset 10.4 Delete all Bluetooth Pairing Information Factory Default Enable Enable Tap the Phone Button Voice Prompt Disable Tap the Jog Dial Factory Default N/A Execute Tap the Phone Button If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough.
SMH5 Rotate Jog Dial Tap Phone Button Tap Jog Dial Speed Dial Execute N/A VOX Phone Enable Disable Voice Prompt Enable Disable Delete All Pairings Execute N/A Exit Configuration Execute N/A Voice Configuration Menu & Button Operations 11. USING THE SMH5 11.1 Volume Adjustment You can easily adjust the volume by rotating the Jog Dial. You will hear a beep when the volume reaches maximum or minimum level.
SMH5 Note: 1. I f you are using multipoint mobile phone connection and you have an incoming call from the second phone during the call of the first phone, then you may still receive the call from second phone. In this case, the call from the first phone is on waiting mode. If you end a call, then it will automatically guide you to the first phone call. 2. If you are using multipoint connection of mobile phone and GPS, you may not listen to the GPS voice instruction during the phone call. 11.
SMH5 6. If you want to exit the speed dial immediately, rotate the Jog Dial until you hear a voice prompt saying “Cancel”, and tap the Phone Button or the Jog Dial. If any button is not pressed within 15 seconds, the SMH5 will exit the voice speed dial menu and goes back to stand-by mode. Note: Make sure that you should connect the mobile phone and the headset in order to use the speed dial function. 11.4 Intercom Conversation 1.
SMH5 Terminate a. To answer the phone call and stop the intercom conversation, tap the Jog Dial or the Phone Button. When you hang up the phone call, the intercom will automatically be recovered. b. To reject the phone call and stay on the intercom conversation, press the Jog Dial for 2 seconds until you hear a beep. Unlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation by an incoming mobile call. 2.
SMH5 11.8 Stereo Music You can listen to stereo music by Bluetooth wireless stereo. The Bluetooth audio device must be paired with the SMH5 by following the Bluetooth Stereo Device Pairing instructions described in the previous chapter. The SMH5 supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SMH5 to remotely control music playback.
SMH5 (Highest) (Lowest) Mobile Phone, Intercom, Music sharing by Bluetooth stereo music, Bluetooth Stereo Music A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by intercom call, and intercom conversation is interrupted by incoming mobile phone call. 11.10 Music Sharing You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation.
SMH5 11.12 Fault Reset When the SMH5 is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pinhole and press the reset button for a second with light pressure. The SMH5 will be switched off after which time, you have to turn the system back on and try again. However, this will not restore the headset to factory default settings. 26 12.
SMH5 Type Basic Function Operation Intercom Duration LED Beep Power-on Phone Button 1 sec + Jog Dial Solid blue Ascending beeps Power-off Phone Button Tapping + Jog Dial Solid red Descending beeps Volume adjustment Jog Dial — — Answer & end mobile phone call Mobile Phone Button English 13.
SMH5 BATTERY INFORMATION MAINTENANCE AND CARE The Product has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard.
SMH5 CERTIFICATION AND SAFETY APPROVALS The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
SMH5 • C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
SMH5 By using the product you waive all substantial legal rights including the right to sue. Please read the following carefully before using the device. If you do not accept all terms of this agreement, you should immediately return the product for a full refund. By using the headset you agree to be bound to this agreement and forfeit the right to sue.
SMH5 person or property however caused, WHETHER ARISING FROM THE NEGLIGENCE OR OTHERWISE, and which may hereafter accrue to you on some future date as a result of said use, to the fullest extent permitted by law. 2. You fully understand and assume the risks in using the Device, including risk of negligent acts or omissions by others. 3.
SMH5 Limitation of Liability EXCEPT AS EXPRESSLY PROVIDED HEREIN, SENA MAKES NO WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED, WITH RESPECT TO ANY EQUIPMENT, PARTS OR SERVICES PROVIDED PURSUANT TO THIS AGREEMENT, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
SMH5 WARNING Sena informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. If the simultaneous use of both ear speakers while riding a motorcycle is prohibited by your local law, please use only a single ear speaker while riding. Sena denies any liability should you choose not to respect this warning.
1.3.0 www.SenaBluetooth.com User's Guide for Firmware v1.
