User's Guide Manual

English
SMH10R
15
Tap (+) Button or (-) Button Tap Center Button
Phone Pairing None
Multipoint Pairing None
Phone Selective Pairing None
Media Selective Pairing None
Speed Dial Execute
VOX Phone Enable / disable
VOX Intercom Enable / disable
VOX Sensitivity
- Set up 1 /2 / 3 / 4 / 5 or cancel
- Enter adjustment mode
- Save and exit
Voice prompt Enable / disable
Delete All Pairings Execute
Factory Reset Execute
Exit Configuration Execute
Voice Conguration Menu & Button Operations
7. PAIRING THE SMH10R WITH
BLUETOOTH DEVICES
Before using the SMH10R Bluetooth headset with any Bluetooth
device for the first time, you need to do the pairing operation. It can
be paired with Bluetooth mobile phones, Bluetooth stereo devices
such as MP3, or motorcycle specific Bluetooth GPS, and with a
Bluetooth adapter or transmitter such as Sena SR10 or SM10. This
pairing operation is only required once for each Bluetooth device.
The headset will remain paired with the devices and automatically
connects to the paired devices again when they are within range.
You will hear a high tone single beep and a voice prompt when
the headset connects to a paired device automatically: “Phone
connected” for a mobile phone, or “Media connected” for a
Bluetooth stereo device.