User's Guide Owner manual

EXPAND
16
5.9 ExitVoiceCongurationMenu
Voice Prompt
“Exit conguration”
Factory Default N/A
Execute Press the Center Button
To exit voice configuration menu and get back to
stand-by mode, press the (+) Button or (-) Button
until you hear the voice prompt, “Exit conguration”.
Press the Center Button to confirm.
Press (+) Button or
(-) Button
Press Center Button
Phone Pairing None
Multipoint Pairing None
Phone Selective Pairing None
Media Selective Pairing None
Speed Dial Execute
Voice prompt Enable / disable
Delete All Pairings Execute
Factory Reset Execute
Exit Configuration Execute
Voice Conguration Menu & Button Operations
6. PAIRING THE EXPAND WITH
BLUETOOTH DEVICES
Before using the Sena Expand headset with any
Bluetooth device for the first time, you need to do
the pairing operation. It can be paired with Bluetooth
mobile phones, Bluetooth stereo devices such as
MP3 and with a Bluetooth adapter or transmitter
such as Sena SR10 or SM10. This pairing operation
is only required once for each Bluetooth device.
The headset will remain paired with the devices
and automatically connects to the paired devices
again when they are within range. You will hear a
high tone single beep and a voice prompt when the
headset connects to a paired device automatically:
“Phone connected” for a mobile phone, or “Media
connected” for a Bluetooth stereo device.