Quick Start Guide

ENGLISH
Body Unit
(Left side)
Camera part Body Unit
(Right side)
Battery Screwdriver / Screws USB cable for charging
Micro SD Card
(32GB)
Quick Start Guide
Operation Guide - Voice/Sound effectMain Features Main Features / How to install Operation Guide - Multi button Operation Guide - LED CheckBox Package
Camera Part
Image Sensor
Lens / Body tube
Battery Part
Removable battery
Charge / Full Charge LED
* Optional
Main Body Unit
AP & Memory / Micro SD Card socket
Charge USB / Multi Button / Power
WiFi / Reset button
LED Lamp
Base Plate
* Optional
Shield
Parts
Description
Multi button
1. Single click : ▶ (when power off) Power on
▶ (when power on) Take picture
2. Double click : Record video ON/OFF
3. Long-press : ▶ 3~5 seconds : Power off
▶ Over 10 seconds : Initialize System Setting
1. Camera Red LED : ▶ OFF : Battery charge remaining over 15%
▶ ON : Battery charge remaining between 5% ~ 15%,
White LED OFF to save power
▶ BLINK : Battery remained charge under 5%,
WiFi OFF to save power
2. Battery Red LED : ▶ ON : Charging
▶ OFF : Fully charged
3. White LED : ▶ When power on : LED light on from both ends to
center in order, then LED light off.
▶ When power off : LED light on from center to both ends
in order, then LED light off.
▶ LED light can be always on by setting in App.
4. Blue LED : LED light always on when power is on.
WiFi Connection guide
LED
On smart phone WiFi setting menu, select 10A helmet cam SSID and enter PW
to connect 10A helmet cam and smart phone with WiFi.
▶ ID : SMART HJC 10A
▶ PW : 12345678
WiFi
Connection
Voice and Sound effect on at the same time
▶ Start : "Sound effect + Hello"
▶ End : "Sound effect + Good-bye"
▶ Take picture : "Sound effect"
▶ Record video : "Sound effect+Start recording", Sound effect + Stop recording"
"Video recording" (every 5 minutes)
▶ System restart : "Restarting the System"
▶ Battery : "Battery is discharged. Please change the battery"
▶ SD CARD : "Please insert SD Card", "Starting SD Card format"
"SD Card format completed", "Please check SD Card"
"SD Card is full"
"Need to format SD Card"
▶ System initialize : "System initialize started", "System initialize completed"
▶ "Starting Firmware Upgrade", "Firmware upgrade completed"
▶ "GPS connected"
▶ "Settings changed"
▶ "Shut down the system due to the device high temperature"
Voice /
Sound effect
How to install
1. Attach camera part onto the base plate using enclosed screws.
2. After assembling base plate and camera part, attach it onto
the helmet shield using helmet assembly screws.
3. Put main body and battery part onto the base plate’s lever part.
They will be assembled by lever.
1 2 3
GPS location
information
USB
Charging
Simple one-touch
side control button
Stereo
Mic
Removable
battery
Waterproof Viewer Application
Window/MAC
Video resolution
QHD (2560x1440)
3Axis acceleration
G-Sensor
HDR
Support
Live SNS video
streaming
LED status
indicators
Time Lapse
video
Snap
Shot
Video
Recording
Camera Tilt
(Up and down
-10° ~ +10°)
Controlled by
Smartphone App
(Multi-language
support Android, iOS)
Wide angle
field of view
148 degrees
Battery
2,000 mAh
Large capacity
Micro SD card support
(Max.512GB)
WiFi Image stabilization(EIS)/
Warping correction support
2
1
3 3 3
4
KOREAN
카메라부
이미지 센서
렌즈 / 경통
배터리부
착탈식 배터리
충전 / 방전표시 LED
*별매품
본체 유닛
AP & 메모리 / SD카드 소켓
충전 USB / 멀티버튼 / 전원
WiFi / 리셋 버튼
LED Lamp
베이스 플레이트
부분별 설명
Components of this product are subject to change without notice to
the user in order to improve the performance of the product. User must
purchase shield and base plate as a optional.