Instruction Manual
Caterpillar: Non-Confidential
Safety Messages and
Attached Locations
There are several specific safety messages on
this machine. This section introduces the exact
locations of those safety messages and
description of related potential risks. Please
become familiar with all safety messages.
Make sure that all of the safety messages are
legible, clean the safety messages or replace
the safety messages if you cannot read the
words or illustrations. When cleaning the
safety messages, use a cloth and soapy water.
Do not use solvent, gasoline to clean the
safety messages. Replace any safety
message that is damaged, missing or illegible
after cleaning. If a safety message is attached
to a part that has been replaced, install a new
safety message on the replacement part.
No Entry
( No 1: located in the articulation area of frame)
Do not Walking Beneath Work
Tools
(No 2: located on both sides of lift arms)
Never Put Hands Close to
Rotary Fan and Do not Get Too
Close to the Machine
(No. 3 and 4: located at the rear end of engine
hood)
General Precautions
Safety Rules
Only a trained and qualified person is
authorized to operate and maintain the
machine.
Follow all safety rules, precautions and
instructions while operating or performing
maintenance on the machine.
Do not operate the machine if you are sick,
sleepy, after taking medicine, or after drinking
alcohol. Operating in such cases will adversely
affect your judgment and may lead to an
accident.
When working with another operator or a
flag person on the job site, ensure that all
persons understand all hand signals that are to
be used.
Follow all rules and regulations concerning
safety.
Safety Devices
Make sure that all protective guards and
all covers are secured in place on the machine.
Repair immediately if damaged.
Use safety devices properly, such as
control levers lockout device and seat belt.
Never remove any safety devices. Always
keep them in good operating condition.
Improper use of safety devices could result
in serious injury or death.