Instruction Manual

68
Caterpillar: Non-Confidential
Fluid Specification
Use the following regulated specification and varieties to ensure the machine normally
operate when adding and replacing the different kinds of oil.
Notes:
The engine info of this section is only applied to Weichai engine configuration, for
Cummins engine’ maintenance and troubleshooting&parts information, please refer to
the supplied
《Cummins Operation And Maintenance Manual》
ATTENTION
1. Do not use a different brand of hydraulic oil. If you have to use different brand of hydraulic
oil, you must clean the system first.
Component
Used
Ambient Temp.
Specification
Remark
Engine
-40℃
API CH-4 ， CG-4 ，
CF-4/SJ，SAE5W-40
Recommended oil:
Please contact local
agency or SEM
dealer. Use SEM
appointed oil.
-15℃～50℃
API CH-4, CG-4,
CF-4/SJ，SAE15W-40
-20℃～40℃
API CG-4 ， CF-4 ，
CF/SJ，SAE10W-30
-15℃～50℃
API CF-4 ， CF/SG ，
SAE15W-40
Transmission
-5℃～40℃
ISOVG46, L-HM46
-26℃～40℃
ISOVG46, L-HV46
-40℃
SAE5W-40
Axle
-40℃
SAE75W-90 ， API
GL-5
-20℃～40℃
SAE85W-90, API
GL-5 or SAE80W-90,
API GL-5
Hydraulic
System
-5℃～40℃
ISOVG46, L-HM46
-26℃～40℃
ISOVG46, L-HV46
-40℃
SAE5W-40
Booster
SAEJ703 DOT4 or
DOT3 Break Fluid
Grease
Summer
NGLI2
Winter
Antifreeze
Fluid
Below 0℃
YF-2 OR YF-2A
Fuel tank
Above -5℃
0# light diesel
Below -5℃
-10# or -35# light
diesel